MANUAL DE UTILIZARE

Software CMS HiP2P Client

1

I. Instructiuni utilizare Software CMS HiP2P Client

1. Instructiuni de instalare1.1 Cerinte minime hardware si software Serie Pentium IV, frecventa CPU >2.0GHzRAM > 2GBHard Disk > 120 GBRezolutie > 1024 x 768Windows2000/ Windows XP (recomandat)/ Windows2003/ Windows Vista/ Windows7/81.2 InstalareDublu click pe fisierul de instalare de pe CD-ul din pachet. Apare urmatoarea interfata:

Alegeti calea de instalare si faceti click pe “Next”.Dupa finalizarea instalarii, urmatoarea iconita va aparea pe desktop:

2. Instructiuni utilizare software CMS2.1 Autentificare

2

Nume utilizator implicit: adminParola: lasati campul necompletat

2.2 Interfata CMS

Interfata previzualizare

Interfata redare inregistrari locale

Interfata redare inregistrari stocate la distanta

Interfata setari

Interfata istoric

Iesire din cont

Iesire din CMS

Buton zoom Selectie afisare canale: 1,4,6,8,9,16

Ecran intreg

Ascunde / Afiseaza lista mesaje alarma Buton difuzor

Buton inregistrare Buton preluare imagine (snapshot)

Buton intercom

3

2.3 Administrare camere video2.3.1 Adaugare camera

Click buton Config pentru a adauga si a configura o camera.

Adauga o zona

Modifica numele zonei selectate

Adauga o camera manual

Editeaza configurari camera selectata

Sterge camera selectata

Adauga camera video in zona selectata

Cauta camera in retea

Selecteaza toate camerele gasite in retea

Sterge zona selectata

O camera poate fi adaugata in lista folosind cautarea in retea sau manual.Adaugare camera prin cautare in retea:Click buton Search. Software-ul va cauta toate camerele din retea. Selectati camera dorita si adaugati-o in lista facand click pe butonulAdaugare camera manual:Click pe butonul

Daca e prima utilizare a soft-ului trebuie mai intai sa creati o zona in care sa adaugati camera prin apasarea butonului “Add Area” si introducand numele zonei dorite.

4

[UID] fiecare camera are un cod UID unic[Name] Nume camera maxim 15 caractere[User name] Numele de utilizator al camerei (implicit este ‘admin’)[Password] Parola camerei (implicit este ‘admin’)[Area] Zona de afisare a camerei

2.4 Previzualizare imaginiDupa adaugarea si configurarea camerei, faceti click pe butonul Preview. Modul de afisare implicit este impartirea ecranului in 4. Software-ul suporta afisarea a maxim 36 de camere.

Nicio camera nu a fost asociata acestui canal

Buton Intercom

Camera conectata

Camera nu este conectata

Camera inregistreaza

Buton Difuzor

Camera din canalul respectiv inregistreaza

Pentru a previzualiza o camera faceti dublu click pe UID-ul sau pe numele camerei din Lista din partea stanga a ecranului sau faceti click pe UID si trageti in partea dreapta pentru previzualizare.

5

Click dreapta pe orice zona adaugata in Lista din partea stanga a ecranului. Apare imaginea de mai jos:

[Connected All] Conecteaza toate camerele din zona selectata[Start manual record of area] Porneste inregistrarea manuala in zona selectata[Stop manual record of area] Opreste inregistrarea manuala in zona selectata[Auto adjust all] Camera regleaza automat proportiile imaginii[Full display all] Camera afiseaza imaginile pe toata suprafata segmentului selectat

2.5 PTZ Control2.5.1 PTZ ControlFolositi cele 8 taste directionale pentru a controla miscarile de rotatie ale camerei

Largire diafragma

Micsorare diafragma

Marire imagine

Micsorare imagine

Focus pe plan apropiat

Focus pe plan departat

NOTA: Aceste setari sunt active doar pentru camerele cu lentile varifocale

6

2.5.2 PresetariPuteti preseta maxim 256 de configurari. Numarul de presetari depinde de modelul de camera video.

2.6 Administrare inregistrare2.6.1 Planificare inregistrare

Click pe butonul ConfigClick pe Record Management. Creati un plan conform imaginii de mai sus.SUN-SAT Zilele saptamanii0 - 23 Orele zilei cu diviziuni de jumatate de ora

[General record length] Lungimea implicita a inregistrarilor video este de 5 minute. Valorile care pot fi setate sunt cuprinse intre 1 minut si 30 de minute. [Remaining disks recycling space] Spatul rezervat pe disc pentru inregistrarile video poate fi setat intre 1GB - 50GB. Cand spatiul ramas liber este mai mic decat cel setat, fisierele vor fi inregistrate pe urmatorul disc sau vor fi sterse inregistrarile mai vechi pentru a crea spatiu. Valoarea implicita: 20GB.[Record format] Disponibile doua valori: H264 si AVI[No hard disk space coverage] Click “Yes” - daca spatiul ramas este insuficient, vor fi sterse inregistrarile mai vechi. Click “No” - daca spatiul ramas este insuficient, camera nu va mai inregistra.

7

[Record path] Software-ul CMS va testa hard disk-ul si va afisa partitiile.Calea implicita pentru inregistrarile video este partitia D.

2.6.2 Inregistrare manualaSelectati fereastra, apoi click pe sau click dreapta si alegeti Record. Verificati planul de inregistrare creat anterior si calea de stocare a inregistrarilor.

Camera inregistreaza conform planului de inregistrare presetat

Camera inregistreaza manual

2.7 Redare inregistrari locale

2.7.1 Redare inregistrari folosind cautarea dupa un anumit interval de timp

Buton redare inregistrare

Buton stop redare inregistrare

Buton redare inregistrare secventa cu secventa

Buton preluare imagine instantanee (snapshot)

Buton ecran intreg

Buton difuzor. Click daca doriti redare inregistrare cu sunet

Selectie viteza redare

Buton marire imagine. Folositi mouse-ul pentru delimitarea zoneiin care doriti zoom

8

2.7.2 Redare inregistrari folosind cautarea dupa fisierSelectati canalul, data si intervalul orar:

2.8 Redare inregistrari stocate pe cardul micro SDPuteti reda inregistrarile de pe cardul microSD. Selectati canalul, data si intervalul orar. Pentru a reda, dispozitivul pe care s-au stocat inregistrarile trebuie sa fie conectat.

2.9 Setare parametriClick pe butonul ConfigSelectati Parameter settings

2.9.1 Parametri VideoVideo coding: setati frecventa si codare videoVideo parameters: setati rezolutia video, tip flux, bit rate, cadre pe secunda, calitate imagine etc.OSD setting: setati nume OSD

Pentru a descarca o inregistrare salvata pe cardul de memorie introdus in camera selectati inregistrarea din lista din stanga apoi dati click dreapta pe ea si selectati optiunea “Download”.

9

2.9.2 Parametri imagineWDR: ON sau OFF. Implicit este OFFExposure mode: Setati expunerea pe Auto / Indoor (Interior) / Outdoor (Exterior). Implicit este Auto.Image priority mode: Mod prioritate imagine. Puteti selecta prioritate iluminare sau prioritate secventaIR Control: Control Infrarosu. Puteti selecta Auto / On / Off. Implicit IR este ON (imagine alb-negru), IR Off (imagine color)

2.9.3 Parametri audioStream type: Tip flux. Alegeti flux principal sau flux secundarCapture audio: Captare audio. ON sau OFF. Implicit este OFFAudio format: G.711 sau G.726Audio input: Microfon. Volumul de intrare si de iesire este intre 80 si 95

10

2.9.4 Setari alarma

Detectie miscareSensibilitate: scazuta - 25, medie - 50 sau mare - 75Sunet alarmaSunet alarma ON sau OFFVolumul - setati valori intre 1 - 100. Implicit este 50NOTA: doar unele camere suporta aceasta functieAlarma externaAlarma externa ON sau OFF; functie suportata doar de camerele cu intrare si iesire pentru alarmaAlarm LinkagePuteti seta:Trimitere imagini alarma prin emailSalveaza imagini pe server FTPSalveaza inregistrare video pe server FTPSalveaza imagini pe card microSDSalveaza inregistrari video pe card microSD

Numar imagini capturate: setati de la 1 la 3

11

Programare alarma

SUN-SAT Zilele saptamanii0 - 23 Orele zilei cu diviziuni de jumatate de ora

2.9.5 Setari reteaNetwork settingIntroduceti parametrii de reteaRTSP portSetati portul RTSP sau alegeti verificare RTSPONVIFSetati parametrii ONVIFONVIF ON sau OFF, setari parametri imagine etc.

12

2.9.6 Card SD

Setati un plan de inregistrareTip flux: flux principal sau secundarLungime inregistrare: setati valori intre 15 - 900 secunde. Valoare implicita 600 secunde.Formatare card SD

2.9.7 Captura imagineBifati “Salveaza imagini pe card SD”.Daca setati intervalul la 60 de secunde, atunci, la fiecare 60 de secunde va fi salvata o imagine pe card.Bifati “Salvati imagini pe server FTP”Daca setati intervalul la 60 de secunde, atunci, la fiecare 60 de secunde va fi salvata o imagine pe server

2.9.8 PTZPuteti seta protocolul, control PTZ, viteza PTZ, baud rate etc.NOTA: nu toate camerele video suporta functia PTZ

13

2.9.9 Informatii autentificarePuteti modifica parola de autentificare

2.9.10 SistemSincronizare cu ora din reteaSetati server NTP, fus orar etc.Informatii dispozitivSe pot obtine informatii despre dispozitiv: nume, versiune software, adresa IP etc.

2.9.11 WiFiPasul 1: Activati WiFi, click cauta semnal WiFiPasul 2: Dublu click pe SSID al retelei WiFi folositaPasul 3: Introduceti parola WiFiPasul 4: Click buton WiFi Check

14

2.10 Administrare utilizatoriImplicit utilizatorul administrator este admin, fara parola. Dupa ce v-ati autentificat ca administrator, puteti adauga sau sterge alti utilizatori. Sunt trei tipuri de utilizatori: admin, user si guest cu drepturi diferite.

Click butonul ConfigClick User managementDin aceasta interfata puteti adauga utilizatori, sterge utilizatori sau modifica drepturi sau parola utilizatori.

2.11 Alte setari

[Connection timeout] poate fi setat intre 5 - 60 secunde[Log retention time] in intervalul setat (o luna, doua luni, trei luni, sase luni) istoricul sistemului nu poate fi sters[Snapshot format] format imagine captura: JPG sau BMP[Image snapshot path] calea unde vor fi salvate capturile[Booting the system automatically run program] cand se deschide Windows, software-ul CMS porneste automat[Single screen number] ecranul poate fi impartit in 16, 25 sau 36 de imagini[Display mode] Direct Draw, Direct 3D

15

[Password] parola implicita pentru adaugare dispozitiv[Export parameters] exporta toti parametrii din CMS intr-o copie de rezerva[Import parameters] importa toti parametrii dintr-un alt CMS. Cele doua versiuni de CMS trebuie sa fie identice.[Rebuild video index] sterge si reface video database index file

2.12 Istoric[All logs] Inregistreaza toate informatiile din sistem[System log] Inregistreaza autentificare/deconectare utilizatori, configurare utilizatori etc.[Operation log] Inregistreaza toate operatiunile efectuate de un utilizator[Alarm log] Inregistreaza informatii alarma dispozitiv

16

USER MANUAL

Software CMS HiP2P Client

17

I. Usage instructions Software CMS HiP2P Client

1. Installation instructions1.1 Installation requirements Pentium IV, frequency CPU >2.0GHzRAM > 2GBHard Disk > 120 GBResolution > 1024 x 768Windows2000/ Windows XP (recomended)/ Windows2003/ Windows Vista/ Windows7/81.2 Installation Double-click the installation package, it will pop up below interface:

Select the installation path, click “Next”, then installation finished.After installation, it will show below icon on desktop:

2. CMS software intruction2.1 Login

18

Default user name: adminPassword: no password

2.2 CMS interface

Preview

Local playback

Recording playback

Settings

Log

Logout

Exit CMS

Zoom Display: 1,4,6,8,9,16

Full screen

Hide / Show lista alarma messages Speaker

Recording Snapshot

Intercom

19

You can add a device manually or using search function.Search to add device in LAN:Click Search button. The software will search all the devices in that network. Select a device and add it to the List by clickingAdd device manually:Click

2.3 Devices management2.3.1 Add device

Click Config to add and configure a device.

Add area

Modify area

Manualy add device

Modify selected device

Delete selected device

Add the searched devices to selected area

Search the devices in LAN

Search the devices in LAN

Delete selected area

20

[UID] each device has a unic UID[Name] Device name, can be self-defined, max 15 characters[User name] User name of the device, default is admin[Password] Login password of the device, default is admin[Area] displaying area of the device

2.4 Image previewAfter configured device, clicking “preview” button in Tab bar. The maximum image segmentation is optional, has 16/25/36 image mode. Higher the picture number, the performance of host also need to be promoted.

this channel do not connect any device

Intercom

Device connected

Device not connected

this channel is recording

Speaker

The device is recording

Double click the Device UID or name in List mode, or drag UID to window, it will display images.

21

Right click any area, will popup below picture:

[Connected All] Connect devices in selected area[Start manual record of area] Open manual record in selected area [Stop manual record of area] stop manual record in selected area[Auto adjust all] he device adjust image display ratio automatically in select area[Full display all] the device display images in select area as the size of segmentation picture

2.5 PTZ Control2.5.1 PTZ ControlYou can control PTZ of eight directions rotation by direction key

Iris enlarge button

Iris shrink button

Zoom in button

Zoom out button

Focus in button

Focus out button

22

2.5.2 Preset settingThe CMS can support Max 256 preset points. For how many preset points can be used in the concrete, please check the preset quantity instruction that camera supported.

2.6 Record management2.6.1 Plan of record

Click ConfigClick Record Management. Create a plan as in the image above.SUN-SAT means one week, based on the count of day 0 - 23 means one day, based on the unit of half an hour.

[General record length] The default record length is 5 minutes in system setting for a single recording file. The file can set 1-30minutes. [Remaining disks recycling space] The scope is 1G-50G optional, when disk space is less than set range, it will skip to another disk or delete earliest record file(default recycling is 20GB)[Record format] Disponibile doua valori: H264 and AVI record formats[No hard disk space coverage] Select “Yes”, when all disk space is less than the set of disk space, it will delete the earliest record. Select “No”, when all space is less than the set of disk space, it will stop recording.

23

[Record path] After installed CMS, CMS will test the hard disk in device automatically, and display in the list, default to D disk.

2.6.2 Manual recordingFirstly select window, then click button or right-click window to choose record. Please check plan of record to see record length and path setting.

it means this channels is recording according to the plan

it means the channel is recording manually

2.7 Local playback

2.7.1 Record playback retrieval

Recording play button

Stop playing button

Single frame play button, when play recording, click it to single frame play

Image snapshot button, choose play window, click it to snapshot images to disk.

Full screen button

Voice button, you can choose whether open voice during playing recorddefault is closed.

Select play speed

Electronic zoom in button, select the button in the process of play recordingthen draw the magnified image region in the window.

24

2.7.2 Record playbackSelect channel, date and time:

2.8 Record playback from micro SD cardIt can remote playback the timing record or alarm record in SD card, select the playback channel, date, start and end time.

2.9 Parameter settingsClick ConfigSelect Parameter settings

2.9.1 Video parametersVideo coding: can set frequency, video codingVideo parameters: can set video resolution, stream type, code rate, frame, main frame interval, video coding control and coding qualityOSD setting: can set OSD name, OSD time

25

2.9.2 Image parametersWDR: choose the box in front of WDR, means WDR on, default is offExposure mode: can set auto, indoor, outdoor; default is autoImage priority mode: can set illumination priority, frame priorityIR Control: can set auto, on, off; default IR on is black white mode; IR off is color mode

2.9.3 Audio parametersStream type: can choose main stream or second streamCapture audio: on or off, default is offAudio format: G.711 or G.726Audio input: Microphone input. Input volume and output volume is 80 and 95.

26

2.9.4 Alarm settings

Motion detection on or offSensitivity: can choose low, medium, high; low sensitivity is 25; medium sensitivity is 50, high sensitivity is 75.Sound alarmcan set sound alarm on or off, volume scope can be set 1-100, default is 50Note: only some cameras can support this function.External Alarmcan set external alarm on or off; only support the cameras with alarm input outputAlarm LinkageCan set:Email alarm and sending alarm picturesSave pictures to FTP serverSave videos to FTP serverSave pictures to SD cardSave videos to SD cardAlarm snapshot number, 1-3 can be set

27

Alarm time setting

SUN – SAT means one week, based on the count of day ; 0 – 23 means one day, based on the unit of half an hour

2.9.5 Network settingNetwork settingInput network parametersRTSP portset RTSP port or choose RTSP permission verify ONVIFSetati parametrii ONVIFset relevant parameters of ONVIF; ONVIF on or off, ONVIF port, Time zone setting, image parameter settings, and so on

28

2.9.6 microSD card

Start plan of record: start timing record stream type: record stream, main stream and sub stream optional record length: 15-900 seconds can set, default is 600 secondsformat SD card: can format SD card recording time can be set; it is recording time that show green on the right

2.9.7 Timing snapshotTick “save pictures to SD card”, SD card time interval is 60 seconds, it means snapshot a picture saved to SD Card every 60 seconds

Tick “save pictures to FTP server”, FTP time interval is 60 seconds, it means snapshot a picture saved to FTP server every 60 seconds

2.9.8 PTZCan set protocol code, PTZ protocol, PTZ speed, Baud rate, date bits, stop bits, verify and other functions Note: only some cameras support PTZ setting function

29

2.9.9 Login informationYou can modify password of the device

2.9.10 SystemSynchronization with network time; Set NTP server, sync time interval, time zone, etc.device informationcan obtain current information of the device; including device name, software version, IP address, MAC address, etc. ; can restart the device and restore to factory default setting

2.9.11 WiFiStep 1: Select enable WIFI, click search WIFI signalStep 2: Double-click the SSID of WIFI usingStep 3: Input WIFI password keyStep 4: Click “setting” button, when prompt set up successfully, clicking check WIFI, after prompt set up successfully then unplug the net cable

30

2.10 User managementThe factory default administrator user of the device is admin, password is empty. After log in by administrator, he can add user, delete user and set user permission. User permission has three types: admin, user, guest.

Click ConfigClick User managementFrom this interface you can add users, delete or change permissions or change user password.

2.11 Other settings

[Connection timeout] connection time can set 5-60seconds[Log retention time] IIt has a month, two months, three months, six months four options, the CMS logs in the set period of time can not be deleted[Snapshot format] It refers to the format that CMS snapshot pictures, snapshot format: JPG and BMP available[Image snapshot path] It refers to the saving path that CMS snapshot pictures[Booting the system automatically run program] cWhen start Windows, it uploads monitoring software automatically. If you don't choose it, program doesn't start.[Single screen number] It can set maximum number of single screen: 16 pictures, 25 pictures, 36 pictures (need to restart the software to work)

31

[Password] can set default password when adding device[Export parameters] Export all set parameters from CMS (backup all configuration parameters)[Import parameters] import all exported setting parameters to another CMS, restore all configuration parameters (the version of two CMS must keep the same, otherwise it may occur exception.)[Rebuild video index] Delete the video database index file, rebuild video database index file

2.12 Log[All logs] IRecord all information of system[System log] Record the user login, exit, and user configuration, etc[Operation log] Record all operation information from users[Alarm log] Record device alarm information