tema de casa autocad

7/28/2019 Tema de Casa Autocad

1/9

UNIVERSITATEA DE STAT DIN PITETI

FACULTATEA DE MECANIC I TEHNOLOGIE

SPECIALIZAREA AUTOVEHICULE RUTIERE

TEM DE CAS

Infografica AUTOCAD II

STUDENT: FERARU GEORGEL

GRUPA: 212


2/9

AN UNIVERSITAR 2012-2013

I. Realizam conturul (trasam axa de simetrie pentru piesa si stergem elementele decare nu mai avem nevoie cu trim)

loaded successfully. Customization Group: ACADCustomization file loaded successfully. Customization Group: CUSTOMCustomization file loaded successfully. Customization Group: IMPRESSIONCustomization file loaded successfully. Customization Group: EXPRESSRegenerating model.AutoCAD Express Tools Copyright 2002-2004 Autodesk, Inc.AutoCAD menu utilities loaded.Command: COMMANDLINECommand: DASHBOARDCommand: TOOLPALETTESCommand: _line Specify first point:

Specify next point or [Undo]: 23Specify next point or [Undo]: 12Specify next point or [Close/Undo]: 9Specify next point or [Close/Undo]: 33Specify next point or [Close/Undo]: 26Specify next point or [Close/Undo]: 8Specify next point or [Close/Undo]: 26Specify next point or [Close/Undo]: 9Specify next point or [Close/Undo]: 14Specify next point or [Close/Undo]:Specify next point or [Close/Undo]: *Cancel*Command: _offsetCurrent settings: Erase source=No Layer=Source OFFSETGAPTYPE=0Specify offset distance or [Through/Erase/Layer] : 13Select object to offset or [Exit/Undo] :Specify point on side to offset or [Exit/Multiple/Undo] :Command:Command: _.erase 1 foundCommand:** STRETCH **Specify stretch point or [Base point/Copy/Undo/eXit]:

Command:** STRETCH **Specify stretch point or [Base point/Copy/Undo/eXit]:Command: *Cancel*Command: _findCommand: _propertiesCommand: *Cancel*Command:Command:Command: _trimSelect object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:

2


3/9

Select object to trim or shift-select to extend or

Command: chamfer(TRIM mode) Current chamfer Length = 0.5000, Angle = 45Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]:Select second line or shift-select to apply corner:

II. Aplicam comanda Region pentru a transforma conturul plan in suprafataIII. Aplicam comada Revolve pentru a obtine corpul 3D (se roteste conturul creat in

jurul axei definite)

Command: regionSelect objects: Specify opposite corner: 12 foundSelect objects:1 loop extracted.1 Region created.Command: revolveCurrent wire frame density: ISOLINES=4

Select objects to revolve: 1 foundSelect objects to revolve:Specify axis start point or define axis by [Object/X/Y/Z] :Specify axis endpoint:Specify angle of revolution or [STart angle] :

3


4/9

Putem vizualiza cu ajutorul optiunii 3D free orbit corpul obtinut:

Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to displayshortcut-menu.Regenerating model.Command: '_panPress ESC or ENTER to exit, or right-click to display shortcut menu

4


5/9

IV. Cream una dintre cele doua gauri (sub forma unui cerc), o multiplicam cuoptiunea Array, iar cu comanda Extrude le deplasam prin corp pana in parteaopusa a flansei

Automatic save to C:\DOCUME~1\Catalina\LOCALS~1\Temp\Drawing1_1_1_3905.sv$ ...Command:

Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to displayshortcut-menu.Regenerating model.Command:Command:Command: _-view Enter an option[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _back Regenerating model.Command:Command:Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tanradius)]:

Specify radius of circle or [Diameter]: 30Command:Command:Command: _line Specify first point:Specify next point or [Undo]: Zero length line created at (120.0493, -7.2613,0.0000)Specify next point or [Undo]:Specify next point or [Close/Undo]:Specify next point or [Close/Undo]:Command:Command: _trim

Current settings: Projection=UCS, Edge=NoneSelect cutting edges ...Select objects or :Select object to trim or shift-select to extend or[Fence/Crossing/Project/Edge/eRase/Undo]:Select object to trim or shift-select to extend orCommand:Command:Command: _arraySelect objects: 1 foundSelect objects:

Specify angle of array: Specify second point:Specify angle of array: Specify second point:Command:Command: _.erase 1 foundCommand:Command: _.erase 1 foundCommand:Command: _.erase 1 foundCommand: Command: _.erase 1 found

5


6/9

Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to displayshortcut-menu.Regenerating model.Command:Command:Command: _-view Enter an option[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _back Regenerating model.

Command: extrudeCurrent wire frame density: ISOLINES=4Select objects to extrude: 1 foundSelect objects to extrude: 1 found, 2 totalSelect objects to extrude:Specify height of extrusion or [Direction/Path/Taper angle]: -18Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to displayshortcut-menu.

6


7/9

Command:Command: _vsshadowsEnter new value for VSSHADOWS : 0Command:Command:Command: _vsshadowsEnter new value for VSSHADOWS : 0Command:Command:Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]: _C

7


8/9

V. Extragem materialul din cei doi cilindrii conturati cu comanda subtract pentru adefini gaurile

Command:Command:Command: _subtract Select solids and regions to subtract from ..

Select objects: 1 foundSelect objects:Select solids and regions to subtract ..Select objects: 1 foundSelect objects:

8


9/9

Command:Command:

Command: _-view Enter an option[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seisoCommand: '_zoomSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] :Command: Press ESC or ENTER to exit, or right-click to display shortcut-menu.Command:Command:Command: _-view Enter an option[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _neisoCommand: '_zoom

Specify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] :Command: Press ESC or ENTER to exit, or right-click to display shortcut-menu.

9

tema de casa autocad

Documents