biliografie primele pagini_ingienria instrumentatiei inteligente

8/7/2019 BILIOGRAFIE Primele Pagini_Ingienria Instrumentatiei Inteligente

1/17

BIBLIOGRAFIE SELECTIV

Abe, K. Yasunaga, N.Miyashita, M. Yoshioka,J. and Daito, D. (1993)

Development of ultra precision grindingequipment for ductile mode surface finishingof brittle materials. In: Proceedings of the 7 th

International Precision Engineering Seminar,153-64

Ackermann, J. Sampled-data control systems. Berlin:Springer 1985

Albrecht, A. et. al. Mikrobewegungssysteme, Mikroelectronik,1993 (5), Fachbeilage Mikrosystemtechnik

Altrock, K. Signalverarbeitung fur Sensorsysteme,Mikroelectronik, 1993 (3), FachbeilageMikrosystemtechnik

Amerongen van J,Jongkind W., 1996

Mechatronics in the Netherlands TransactionMechatronics, vol. 1, No. 2, pag. 106-110

Anderson, B. andMillar, C.E.

Performance of Multilayer Actuators Basedon Piezoelectric and Electrostrictive Mate-rials, Proc. Of Int. Conf. On New Actuators,Bremen, 1994, pp. 167-170

Ando, M. et. al. (1989) Development of large sized aspheric elementfor high output lasers. Journal of the JapanSociety of Precision Engineering, 1989,(Spring), 201-2

Angerer, G. Und Hiessl,H.

Sensoren fur den Umveltschutz, Mikroele-ktronik, 1992 (4), Fachbeilage Mikroperiperi-pherik

Aoshima, Sh., Yoshiza-wa, N. and Yabuat, T.

MicroMass Axis Alignament Device withPiezo Elements for Optical FibresProc. ofthe 3. Int, Symp. On Micro Machine andHuman Science, Nagoya, 1992, pp. 89-96

Aoyama, H., Iwata, F.

and Sasaki, A.

Desktop Flexible Manufacturing System by

Movable Miniature Robots, Proc. of Int.Conf. On Robotics and Automation, Nagoya,1995, pp. 660-665

Arai. T., Larsonneur, R.and Jaya, Y.

Basic motion of micro hand module Proc. ofInt. Conf. on Advanced Mechatronics (ICAM),Tokyo, 1993, pp 92-97

Arai. T., et. al. Micro Manipulation Based on MicroPhisycs, Proc. of. IEEE/RSJ, Int. Conf. onIntelligent Robots and Systems (IROS),

61


2/17

Pittsburgh, Pennsylvania 1995, 236-241 Arnolds, F.: Elektronische Me techink. Stuttgart:

Berliner Union 1976

Arquint, Ph. And vander Schoot, B.H.

Integrated blood-gas sensor for pO2, pCO2and pH, Sensors, Actuators MicrosystemsLaboratory: Report on Research Activities,Institute of Microtechnology, University ofNeuchatel, 1993, p. 25

Astrom, K.; Wittenmark,B.

On self-tuning regulators. Automatica 9(1973) 185-198

Aspden, R. et. Al. (1972) Computer assisted optical surfacing. AppliedOptics, (11-12), 2379

Axelrad, C. et. al. Industrial Applications of Microtechnologiesin Europe, Proc. of the Int. MicromachineSymposium, Tokyo, 1955, pp. 37-46

Astrom, K. Theory and applications of adaptive control:A survey. Automatica 19 (1983) 471-486

Bacher, W. et. al. Herstellung von Rontgenmasken fur dasLIGA-Verfahren, KK-Nachrichten, Jahrgang23 Fordchungszentrum Karlsruhe, 1991 (2-3), S. 84-92

Bailey, S.J.: Incremental Motion Control; Control Eng.,vol. 28, no. 5, 1981, p. 93;

Bailey, S.J.:

Precise positioning: A matter of Sensorsand Loop Dynamics; Control Eng., vol. 27,no. 12, 1980; p.50

Ball, J.M., Murphy,N.A., and Shore, P.(1992)

Ductile mode dimond grinding of opticalgalsses using electrolztic techniquies. In: XIIInternational Congreess of Glass, Vol.6,259-64

Bekey, G.A. andGoldberg, K.Y.

Neural Networks in Robotics, KluwerAcademic Publishers, 1993

Bellman, R. and R.Kalaba

Dynamic Programming and Modern ControlTheory, Academic Press, New York, 1965

Benecke, W. Scaling Behaviour of Micro Actuators, Proc.

of Int. Conf. On New Actuators, Bremen,1994, pp. 19-24

Blattner, J. und

Neu er, S.Fuzzy-Systeme und Neuronale Netze,Mikroelektronik, 1993 (3), Fachbeilage Mi-krosystemtechnik

Bley, P. Und Menz, W. Stand und Entwicklungsziele des LIGA Verfahres zur Herstellung von Mikrostruktu-ren, KfK-Nachrichten, Jahrgang23, For-schungzentrum Karlsruhe, 1991(2-3),S.69-75

62


3/17

BMFT 90 Mikrosystemtechnik, Forderungschwer-punkt im Rahmen des Zukunftkonzeptes In-formationtechnik, BMFT, Bonn 1990

BMFT 94 Mikrosystemtechnik 1994-1999BMFT-Pro-gramm im Rahmen des Zukunftkonzeptes In-formationtechnik,Offentlichkeitsarbeit, BMFT,Bonn, 1994

Boltjanski, W. Mathematische Methoden der Optimierung.Munchen: Oldenbourg 1962

Borucki, L. Dittman, J.: Digitale Me technik, Ediia 2.Berlin: Springer 1971

Branebjerg, J. et. al. A micromachined flow sensor for measuringsmall liquid flows, Proc. of IEEE Int. Conf.on Transducers, San Francisco, 1991, pp 41-46

Brand, S. Laux, T. undTonshoff, H.

Piezoelektrische Aktoren Mikroelektronik,1992 (6) Fachbeilage Mikroperipherik

Breitmeier ,U. Qualitatskontrolle an mikromechanischenBauteilen Mikroelectronik, 1993 (4), Fach-beilage Mykrosystemtechnik

Brugger, J. et al. Microfabricated tools for nanoscience, Jour-nal of Micromechanics and Microengineering,1993 (4), Vol. 3, pp 161-167

Brugger, J. et al. Nanopositioniersystem, Mikroelektronik,1993 (5), Fachbeilage Mikrosystemtechnik

Buker, H. Glasfasersensorik als neue Disziplin derMikrosensorik, 7. IAR Kolloquium, Tagungs-band, Universitat Duisburg, 1993, S11-24

Burns, V. Mikroelectromechanical Systems (MEMS)and SPC Market Study mst news, 1994(10), p. 4

Chalam, V. Adaptive control systems. New York: Dekker1987

Chorkey, E. S. : Shaft encoders, Electromechanical Design;1987, no.1;

Claeyssen, F.,Lhermet, N. and letty,R.

State of the art in the field of magneto-strictive actuators, Proc. Of Int. Conf. onNew Actuators, Bremen, 1994, pp. 203-209

Clark, A.E. High Power Magnetostrictive TransducerMaterials, Proc. Of Int. Conf. On NewActuators, Bremen, 1992, pp. 127-132

Codourey, A. et. al. A robot System for Autimated Handling inMicro-World; Proc. of the IEEE/RSJ Int.Conf. on Intelligent Robots and Systems

63


4/17

(IROS), Pittsburgh, Pennsylvania 1995, pp.185-190

Coleman, Hugh W. &Steel, W. Glenn Jr. :

Experimentation and uncertainty analysis forengineers; 1-st. Ed. New York, John Willey &Sons. 1989;

Colotihin, E. E.: Fotoelectriceskii preobrazovateli balhlineinh paremucenii; Pribor I sistemupravlenia; 1987;

Considine, Douglas M.& Considine, Glenn, D.:

Process Instruments and controlshandbook; 1985, New York , USA;

Dario, P. et. al. Microactuators for Microrobots: a CriticalSurvey, Journal of Micromechanics and

Microengineering, 1992 (2), pp. 141-157 Dario, P. et. al. Endoscopic Micromanipulator with SMA-

Actuated Tip and Grippes, Proc. of Int.Conf. on advanced Mechatronics (ICAM),Tokyo, 1993, pp. 490-492

Dario, P. et. al. Microactuators for Microrobots: a CriticalSurvey, Proc. of the IEEE int. Conf. onRobotics and Automation, San Diego,1994, Tutorial S2

Davies, B.J.: A continuous path machine tool controlsystem using coarse optical gratings;

International Journal of Machine ToolsDesign and Research, 1982;

Demian, T., Tudor, D.,Grecu, E.:

Mecanisme de mecanic fin; Ed. Didactici Pedagogic, Bucureti, 1982;

Despont ,M. et. al. New Design of Micromachined CapacitiveForce Sensor, Journal of Micromechanicsand Microengineering, 1993 (4), Vol. 3, pp.239-242

Dibbern, U. Piezoelectric Actuators in MultilayerTechnique Proc. of Inst. New Actuators,Bremen, 1994, pp. 114-118

DIN 1319 Partea 1: Grundbegriffe der Me technik;

Begriffe fur di e Me unsicherheit un d fur diBeurteilung von Me geraten und Me ein-richtungen (Aug. 1983)

DIN 19226 Regelungstechnik und Steuerungstechnik;Begriffe und Beneunnungen (1968)

DIN 19239 Steuerungstechnik; Speicherprogrammierba-re Steuerungen; Programmierungen. (1983)

DIN 43780 Elektrische Me gerate; Direkt wirkende

anzeigende Me gerate und ihr Zuberhor

64


5/17

(Aug. 1976) Dobos, K. Integrierte Gassensoren, Mikroelektronik,

1990 (5), Fachbeilage Mikroperipherik

Doebelin, E.O. Measurement systems. New York: McGraw-Hill 1975

Dokter, F., Steinhauer,J.

Digitale Elektronik in der Me technik undDatenverarbeitung. Hamburg: Philips GmbH(Vol.1: Editia 5.1975; Editia 4 1975)

Doetsch, G. Anleitung zum praktischen Gebrauch derLaplace-Tranformation und der z-Transformation

Dorsam, Th., Fatikow, S.and Streit, I.

Fuzzy-Based Grasp-Force-Adaptation forMultifingered Robot Hands. Proc. Of the 3rd

IEEE World Congress on ComputationalInteligence, Orlando, Florida, 1994, pp. 1468-1471

Drexler, E.. et. al. Unbounding the Future: The Nanotechno-logy Revolution, William Morrow Verl., NewYork, 1991

Drexler, E.. et. al. Nanosystems: Molecular Machinery, Manu-facturing and Computation, John Wiley &Sons, New York, 1992

Eggert, H. et. al. Eine Informationsverarbeitungumgebung yur

onstruktion und Vermessung von Mikrostru-kturen, Tagungsband yur Vortagsveransta-llung Informationtechnik fur Mikrosiste-meVDE/VDi GME, Stuttgart, 1996, S. 53-57

Evans, W.R. Control system dynamics. New York: McGraw-Hill 1954

Fan, L. et. al. Batch-Fabricated Milli-Actuators, Proc. Ofthe IEEE Int. Conf. On Micro ElectroMechanical Systems (MEMS), Florida, 1993,pp. 179-183

Farrand, C.L. Precision transducer. Patent USA nr.3.202.948 din 24.08.1965

Fatikow, S. andRembold, U.

Principales of Micro Actuators and their A-pplications, Proc. of the IARP Workshop onMicromachine Technologies and Systems,Tokyo, 1993, pp. 108-117

Fatikow, S. andRembold, U.

An Automated Microrobot-Based DesktopStation for Micro Assembly and Handling ofMicroobjects Proc. of the IEEE Conferencein Emerging technologies and FactoryAutomation (ETFA(, Kauai, Hawaii, 1996

65


6/17

Fatikow, S.,Magnussen, B. andRembold, U.

A Piezoelectric Mobile Robot for Handling ofMicroobjects, Proc. of the InternationalSymposium on Microsystems, IntelligentMaterials and Robots (MMIR), Sendai, 1995,pp. 189-192

Fischer, K. Mikromechanik und Mikroeleftronik vereintmit Optik, Technisches Rundschau (TR),1991, (3(, S. 106-108

Fleury, S., Herrb, M. andChatila, R.

Design of a Modular Architecture for Au-tonomous Robot, Proc. of the IEEE Int.Conf. on Robotics and Automation, SanDiego, 1994, pp. 3508-3513

Franklin, G.; Powell, D. Digital control. Reading (Mass.): Addison-Wesley 1980

Fricke, J. AndObermeier, E.

Cantilever Beam Accelerometer Based onSurface Micromachining Tecnology, Journalof Micromechanics and Microengineering,1993 (4), Vol. 3, pp. 190-192

Frick, O. Fertigungsgerechte Montage- und Fugever-fahren fur Mirosysteme, 2. Int. Kongress undAustellung fur Mikrosysteme und Prazisi-ontechnik (Micro-Engineering 95), Tagung-sband, Messe Stuttgart, 1995, S. 44-51

Fruhauf J. el.al.

A simulation tool for orientation dependentetching Journal of Micromechanics andMicroengineering, 1993 (3), Vol. 3. pp. 113-115

Frohne, H., Ueckert, E. Grundlagen der elektrischen Me technik.Stuttgart: Teubner 1984

Fruhauf, J. et. al. A simulation tool for orientation dependentetching Journal of Micromechanics andMicroengineering, 1993 (3) Vol. 3 pp.44-51

Fujita, H. Group Work of Microactuators, Proc. of theInt. IARP-Workshop on Micromachine

Fukuda, T. et. al. Design and experiments of micro mobile

robot using electromagnetic actuatir, Proc. Ofthe 3. Int Symp. On Micro Machine andHuman Science, Nagoya, 1992, pp. 77-81

Fukuda, T. et. al. Micro Mobile Robot Using ElectromagneticActuator, Proc. of Int. IARP Workshop onMicro Robotics and Systems, Karlsruhe,1993, pp. 45-50

Fukuda, T. and Ishihara,H.

Micro Optical Robotic System with CordlessOptical Power Supply, Proc. of Int. Conf. on

66


7/17

Intelligent Robots ans Systems (IROS), Yo-kohama, 1993, pp. 1703-1708

Gambert, R. Sensorsysteme in der Medizintechnik, Mi-kroelektronik, 1991 (3), Fachbeilage Mikro-peripherik

Gardner, J. W. Microsensors: Principles and Applications,John Wiley & Sons, Chichester, 1994

Gegenbauch, U. et. al. Ein System zur automatischen MonatgeMikrosystemen, 2. Statuskolloquium des Pro jektes Mikrosystemtechnik, Tagungsba nd,Forscungszentrum Karlsruhe, 1995, S. 62-66

Gerhard, E. Sensorik im Wandel Universitat Duisburg,

1993, S. 3-9 Gheorghe, I.G. Tehnica Msurrii Partea II Automatizare

& informatizare, 2001

Gheorghe, I.G. Kovacs,Francisc, Pau, Valentin,Palade, D.D.

Ingineria Instrumentaiei Partea II Instrumente, Aparate i Sisteme demsurare, verificare i control dimensional,2000


Ingineria Instrumentaiei Partea I Sistemei traductoare fotoelectrice incrementale dedeplasare i poziie utilizate n mecanic fin,mecatronic i robotic, 1999


Ingineria Instrumentaiei Partea III Echipamente de msurare, reglare i controlpentru procese industriale, 2000


Tehnica Msurrii, 2001

Gheorghe, Gh.: Inteligent and computered measuring bymeans of complex systems and equipmentsof automatic dimensional control, themethod to objectively diagnosticate thequality; la Simpozionul Internaional IMEKO,mai 1996, Germania;

Gheorghe, Gh.: Traductoare incrementale de msurare ipoziionare n soluii modernizate, utilizaten robotica industrial; la COMEFIN 4 , oct.1994;

Gheorghe, I. G Mecatronica, Editura CEFIN, 2002

Gheorghe, I. G Senzori i Traductoare pentru aplicaiiindustriale, Editura CEFIN, 2003

Gheorghe, I. G Mecatronica Integrat Integronica, EdituraCEFIN, 2003

67


8/17

Gheorghe, I. G Tehnica Msurrii Inteligente, Editura CEFIN,2004

Gheorghe, I. G, Palade,D. D., Pau, Valentin,Popa, Florin Ion

MicroSenzoric, MicroMecatronic i Micro-Robotic, Editura CEFIN, 2004

Giesler, Th. Und Meyer,J.-U

Plattenwellen fur Biosensoren, Mikroele-ktronik, 1992 (3), Fachbeilage Mikroperiphe-rik

Glass, I.: Optical shoft encoders Electronic Equip-ment News; 2-nd ed.; 1986. No. 11;

Goodwin, G.; Sin, K. Adaptive filtering and control

Gopel, W. New Materials and Transducers for Chemi-cal Sensors, Sensors Design, August8,1991

Gronau, M. Technologien fur Mikrosysteme, VDI-Ver-lag GmbH, Dusseldorf, 1993

Guth, H. et. al. Automatische Vermessung von 2D- und3D- LIGA-Struktruren zur Qualitatskontrolle,Karlsruhe, 1993, S. 176-182

Hahn, W. Theorie un Anwendung der direktenMethode von Ljapunow. Berlin: Springer1959

Haji Babaei, J. et. al. A New Bistable Microvalve using an SIO2

Beam as Movable Part, Proc. of Int. Conf.on New Actuators, Bremen, 1994, pp. 34-37

Hampel, T. undPalotas, L.

Simulationsgekopplete Parameter-optimie-rung mittels der Evolutionsstrategie in MGlesner Aufgaben der Informatik in derMikrosystemtechnik, Zusammenfassungder Beitrage im Verlauf der Grundung derGI-Fachgruppe 3.5.6. Mikrosystemtechnik,Schlo Dagstuhl, 1994 Hashimoto M. et.al.: Silicon Resonant Angular rate Sensorusing Electromagnetic Ecitation andCapacitive Detection, in Micro System

Technologies 94, (Editors: H. Reichl, A.Heuberger), VDE-Verlag, Berlin, 1994, pp.763-771

Hayashi, T. and Hoshi,S. (1983)

Research on micromechanism. In:Proceedings of the 6 th World Congres sonTMM, vol. 2, p. 1045

Hayashi, T. et. al. A Piezoelectric Cycloid Motor and ItsFundamental Characteristics,

Hartmann, L. Lieneare Systeme. Berlin: Springer 1976

68


9/17

Hauptmann, P. Sensoren: Prinzipien und Anwebdungen,Carl Hanser verlag, Munchen/Wien, 1991

Hawlitschek, G. undLaxhuber, L

Lichtadressierbarer potetiometricher Sen-sor, Mikroelektronik, 1992 (3), FachbeilageMikroperipherik

Hazelgrigg, G.A. Microelectromechanical Systems Researchin the United States, Proc. of the IARPWorkshop on Micromachine Technologiesans Systems, Tokyo, 1993 (18) , S. 20-25

Hemmi, P.: Dinamische Me fehler. In: Komependiumder Grundlagen der Me technik (Hrsg.P.Profos), Essen: Vulkan Verlag 1974

Hertz, J.; Krogh, A. andPalmer, R.G.

Introduction the theory of neutral networks,Addison-Wesley, 1991

Hesselmann, N.: Digitale Signalverarbeitung. Wrzburg Vogel1983

Heuberger, A. Micromechanik mit Methoden der Halbleit-ertechnologie Springer-Verlag, Berlin,1991

Hintsche, R. et. al. Modular Microsystems made in Si-technolo-gy for chemical biosensors, in Micro sys-tems Technologies 94VDE-Verlag, Berlin,1994, pp. 371-379

Hirai, S., Sakane, S. and

Takase, K.

Cooperative Task Execution Technology for

Multiple Micro Robot Systems, Proc. Of theIARP Workshop on Micromachine Technolo-gies and Systems, Tokyo, 1993, pp. 32-37

Holler, E. und Trapp, R. Ein experimenteller Telemanipulator fur dieMinimal-invasive Chirurgie, Karlsruhe, 1993,S.92-99

Horne, D.F.: Dividing, rulling and mask - making; AdamHilger, Londra 1974;

Hosaka, S., Ishitani, T.,and Tamura, H. (1987)

Japanese Journal of Applied Phisycs, 26,531

Hotani, K. et. al. (1991) Japanese Science & Technology, (262), 66

Huang, D, Uchida, H.,

and Aono, M. (1992)

Fabrication of atomic-scale structures on Si

(111)-7 7 using ascanning tunnelingmicroscope (STM). Japanese Journal ofApplied Physics, 31, part 1, 4501-3

Hund, H. Mikrosystemtechnik in der mittelstandi-schen Industrie, SENSOR Report, 1994(2), S. 31-33

Iboston, D.E. et. al.(1990)

In 1990 Symposium on Dry Process, p. 93

Idogahi, T. Micromachine Technology Advanced Ma-

69


10/17

intenance Technologies for Electric-PowerPlants, Proc. of the IARP Workshop onMicromachine Technologies and Systems,Tokyo, 1993, pp. 50-58

Tkuta, K., Aritomi, S.and Kabashima, T.

Tiny Silent Linear Cybernetic ActuatorDriven by Piezoelectric Device with Electro-magnetic Clamp, Proc. of the IEEE Int.Conf. on Micro Electromechanical Systems(MEMS); Travenmunde, 1992, pp. 232-237

Isermann, R. Digitale Regelsysteme. Berlin: Springer1977

Isermann, R. Identifikation dynamischer Systeme. Berlin:

Springer 1988 Isihara, H. et. al. Approach to Distributed Micro Robotic

Systems, Proc. of Int. Conf. on Roboticsand Automation, Nagoya, 1995, pp. 679-684

Ishitani, T. et. al. (1972) Japanese Journal of Applied Physics, 11

Itoh, T et.al. Electromagnetic Ultra Small Motor Proc. ofthe 3. Int. Conf. on Advanced MechatronicsTokyo, 1993, pp. 82-85

Jaeckelin, V.P. et. al Optical Microshutters and Torsional Micro-mirrors for Light Modular Arrays, Proc. of

the IEEE Int. Conf. on Micro Electro Mecha-nical Systems, Lauderdale, Florida, 1993,pp. 124-127

Janocha, H. Aktoren Grundlagen und Anwendungen,Springer-Verlag, Berlin Heidelberg NewYork, 1992

Jendritza, D.J. Piezoelektrische Aktoren in der Mechatronik,VDE-Fachseminar Moderne Aktoren undSensoren in der Automatisierungstechnik,Tagungsband, Universitat des Saarlandes,Saarbrucken, 1993

Jendritza, D.J.und

Schroder, J.

Possible applications and Limitations of

Piezoelectric Actuators in Hidraulic SystemsProc. of Int. Conf. On New Actuators, Bre-men, 1994, pp. 138-143

Johansson, St. Micromanipulation for Micro- and Nano-Manufacturing, Proc. of Int. IARP Workshopon Micro Robotics and Systems, Karlsruhe,1993, pp. 72-83

Kahret, J. und Frank, H. Fuzzy-Logik und Fuzzy-Control, ViewegVerlag, Braunschweig/Wiesbaden, 1993

70


11/17

Karaki-Doy, T. (1988) sensors and Materials, 3,153 Karaki-Doy, T. (1989) In: Proceedings of the International Confe-

rence on Tribology (EUROTRIB 89) P. 2-110

Karaki-Doy, T. (1992) In: Proceedings of the 4 th Sino-Japan jointSeminar on Ultraprecision Technology, p.179

Kato, H, et. al. Photoelectric Inclination sensor forControlling the Attitude of Milli-machine,Proc. of the 2. Int. Symp. on Micro Machineand Human Science, Nagoya, 1991, pp. 93-101

Kikuya, Y. et. al. Micro Alignemen Machine for OpticalCoupling , Proc. of the IEEE Int. Conf. OnMicro Electro Mechanical Systems, FortLauderdale, Florida, 1993, pp. 36-41

Kimura, M. undFujiyoshi, M.

Force Measurement and Control ofElectrostatic Microactuator, Nagoya, 1991,pp. 119-124

Kleinschmidt, P. undSchmidt, F. Des Sensors liebstes Kind, TechnischeRundschau, 1992 (44), S. 46-48

Knobloch, J. Fuzzy-Mikrosysteme in der Sensorik,Tagungsband zur VortragsveranstaltungInformationtechnik fur Mikrosysteme,

VDE/VDI-GME, Stuttgart, 1996, S.11-15 Kostrakievici, .a. Elemente de mecatronic, E. Printech,Bucureti, 2000

Kovacs, Fr. , Cojocaru,G.:

Manipulatoare, roboi i aplicaiile lorIndustriale, Ed. Facla,Timioara, 1982;

Kramer, W. Piezoelectric Actuators for Automative A-pplication: Current Issues and FutureProspects, Proc. of Int. Conf. on NewActuators, Bremen, 1992, pp. 47-50

Kromer, O. et. al. Inteligents triaxiales Beschleunigungssen-sorsystem, 2. Statuskolloquium des Pro- jektes Mikrosystemtechnik, Tagungsband,

Forschungsyentrum Karlsruhe, 1995, S.75-80

Kuo, B. C. , Kelemen,A. , Crivii, M. , Trifa, V.:

Sisteme de comand incremental apoziiei; Ed. Tehnic, Bucureti, 1981;

Kuroda Precisionindustries Ltd. (1991)

Gauge catalogue no. 3

Landau, Y. Adaptive Control. New York: Dekker 1979

Leonhard, W. Diskrete Regelsysteme. Manheim: Bibliogr.Inst. 1972

71


12/17

Linders, J. Mikromachinen, Mikroelektronik, 1993 (5),Fachbeilage Mikrosystemtechnik

Lindsey, K. Smith, S.T.,and Robbi, C.J. (1988)

Subnanometre surface texture and profilemesurment with NANOSURF

Ljung, L. System indentification. Theory for user.Engelwood Cliff, New Jersey: Prentice Hall1987

Lorenz. Th. Faseroptische Temperatursensorren mitflussigen Kristallen, 7. IAR Kolloquium,Tagungsband, Universitat Duisburg, 1993,S. 127-139

Loriferne, B. Analog-digital and digital-analog conversion,

London; Heyden 1982 Magnussen, B. Infrastruktur fur Steuerungs- und Regel-

ungssysteme von robotischen Miniatur- undMicrogreifen, Dissertation, UnuiversitatKarlsruhe, Fakultat fur Informatik, 1996

Matlac, I Mecatronic, Evoluia i caracterizareasistemelor tehnice; E. U. Transilvania, 2002

Matsuoka, T. et. al. Mechanical Analysis For Micro MobileMachine with Piezoelectric Element, Yokoh-ama, 1993, pp. 1685-1690

Matsumoto, T. (1985) Sputtering systems, dry etching systems and

its applications (catalogue). ULVAC Corpora-tion, Tokyo

Mehlhorn, T. et. al. CMOS-compatible Cappacitive SiliconPressure Sensor, Berlin, pp. 277-285

Meyyapan, M. et. Al.(1992)

Journal of Vacuum Science and Technology,BIO, 1215

Mellwraith, A. H.: A moir fringe interpolator of highresolution; Journal of ScientificalInstruments, vol. 41, 2-nd, ed. 1984;

Menz, W. Physikalische Mikrokomponenten fur dieMikrosystemtechnik, 2. Statuskolloquiumdes Projektes Mikrosystemtechnik, Tagung-

sband Forschungszentrum Karlsruhe, 1995,S. 11-14 Menz, W. und Bley, P. Mikrosystemtechnik fur Ingenieure, VCH

Verlag, Weinheim, 1993

Merz, L.: Grundkurs der Me technik, Partea I: Das

Messen elektrischer Gro en. Ediia 5.Munchen: Oldenbourg 1977

Merz, L.: Grundkurs der Me technik, Partea II: Das

elektrische Messe nichtelektrischer Gro en.

72


13/17

Ediia 5. Munchen: Oldenbourg 1980 Millane, J. M. .a.: Shaft encoders, Electromechanical Design,

1966, N.1;

MIT 92 Research in Microsystems TechnologyAnnual Report, MIT, Cambridge, 5/1992

MITI 91 Micromachine Technology Introduction toa new project for the national research anddevelopment programm, MITITokyo, 1991

Miu, P. Introducere n mecatronic, Editura Didactici Pedagogic, R.A. Bucureti, 1999

Miyashita, M. Review of ultraprecision gringing technology.In: Proceedings of the International Congress

for Ultraprecision Technology, Aachen, 41-57 Minsky, M. and Papert,

S.Perceptors: An Introduction to Computatio-nal Geometry MIT Press, Massachussetts,1969

Mocanu, D.R.: Fenomenul Moir I aplicaiile lui ntensometrie; Ed. Tehnic, Bucureti, 1971;

Moye, J.M. .a. : An Evoluation of Precision Shaft AngleEncoders; Journal, 1969, V.8 N.11;

Mohr, J. et. al. Microactuators Fabricated by LIGAProcess Bremen, 1992, pp. 19-23

Mokwa, W. Intelligente Sensorsysteme auf Siliziumba-

sis Universitat Duisburg, 1993, S. 25-75 Muller, R.S. Microdynamics, Sensors and Actuators A,1990 (21-23), pp. 1-8

Muro, H. et. al. Integrated Piezorezistive Accelerometerswith Oil-Damping in Micro System Techno-logies 92,VDE- Verlag, Berlin, m 1992, pp.233-241

Nentwig, J., Scheller,F. W. et. al.

Elektrochemische Biosensoren, Mikroele-ktronik, 1992 (3), Fachbeilage Mikroperi-pherik

Newton, G.C.; Gould,L.A.; Kaiser, J.F.

Analytical design of linear feedback control,New York: John Wiley 1957

Oppelt, W. Kelines Handbuch technischer Regelvor-gange. Weinheim: Verlag Chemie 1972, p.462-476.

Ogata, K. Discrete-time control systems. EngelwoodCliffs, New Jersey: Prentice Hall 1987

Pflier/Jahn/Jentsch: Elektrische Me gerate und Me verfahren.Ediia 4. Berlin: Springer 1978

Philips, C.; Nagle, H. Digital control analysis and design. Engel-woodCliffs, New Jersey: Prentice Hall 1984

73


14/17

Pontryagin, L. S., et al The Mathematical Theory of OptimalProcesses, Wiley, New York, 1962

Quandt, E. Magnetostriktive Schichten als Aktoren inder Mikrosystemtechnik, 1. Statuskolluquiumdes Projektes Mikrosystemtechnik, Tagungs-band, Forschungszentrum Karlsruhe, 1993,S. 151-156

Raijleigh, I.: On the manufacture and theory of diffractiongratings; Scientific Patterns, 1 , 209, Phil,Mag.k v. 47, 1986;

Reeve, C. P. The Calibration of an Optical Flat by Inter-ferometric Comparison to a Master Optical

Flat, NBSIR 75-975, NBS, Washington, D.C., 1975

Reignier, P. Fuzzy logic techniques for mobile robotobstacle avoidance, Robotics andAutinomous Systems, 1994 (12), pp. 143-153

Report on ResearchActivities

Sensors, Actuators & Microsystems Labora-tory, Institute of Microtechnology, Univer-sity of Neuchatel, 1993

Rohrbach. Ch. Handbuch fur elektrisches Messen mecha-

nicher Gro en. Dusseldorf: VDI-Verlag 1967

Russel, A:;

An absolute digital measuring systemsusing an optical grating and shaft encoder;Instrument review; 1966, N.6

Seino, S. (1971) Precision Machines, 50 (7)

Takahashi, Y.; Chan,C.; Auslander, D.

Parameter-einstellung bei linearen DDC-Algorythmen. Regelungstechnik 19 (1971)237-244

Taniguchi N., Nanotehnologie, Sisteme de procesare inte-grat pentru produse ultrafine i de ultra-precizie, E.T., 2000.

Tou, T. Digital and sampled-data control systems.New York: McGraw 1959

Schafer, J. et. al. Entwurf und Einsatz von magnetostriktivenAktoren, VDE-Fachseminar Moderne Akto-ren und Sensoren in der Automatisierungs-technik, Tagungsband, Saarbrucken, 1993

Schone, A. Simulation techniker Systeme. Munchen:Hanser 1974

Schubert, J. Physikalische

Schwarze, G. Algoritmische Bestimmungder Ordnung undZeikonstanten bei P-, I- und D-Gliedern mit

74


15/17

zwei unterschildlichen Zeikonstanten undVerzogerung bis 6. Ordnung. Messen,steuern, regeln 9 (1966) 188-191

Steigun, I.A. Handbook of mathematical functions. (Ed.Abramowitz) New York; Dover 1965

Stockl/Winterling Elektrische Me technik. Stuttgart: Teubner1978

Strobel, H. Experimentelle Systemanalyse. Berlin:Academie-Verlag 1975

Tietze, V., Schenk, Ch. Halbleiter-Schaltungtechnik. Ediia 9. Berlin:Springer 1989

Tirole, N. et. al. 3D Silicon Electrostatic Microactuator, Jour-nal of Micrimechanics and Microengineering,1993 (3), Vol. 3; pp. 155-157

Trnkler, H. R. Die Schlsselrolle der Sensortechnik inMe systemen Effekte Weinheim: PhysikVerlag 1982

Trnkler, H. R. Sensorspezifische Me signalverarbeitung.Messen Prfen Automatisieren. Iun.1986,S.332-338

Trnkler, H. R. Die Technik des digitalen Messens.Mnchen: Oldenbourg 1976

Trnkler, H. R. Die Technik des digitalen Messens.

Mnchen: Oldenbourg 1976 Truxal, J.G. Entwurf automatischer Regelsysteme.

Wien: Oldenbourg 1960, p. 297-338

VDI/VDE IT Technologien und Werzeuge yum Entwurfund yur realisierung anwendungsspezifi-scher Mikrosensoren fur mechanische

Gro en, Reihe: Innovation in der Mikro-systemtechnik, Teltow, 1993

VDI/VDE 2600 Vol.4, 4 Noemb. 1973, VDI/VDE- Richtlineber Metrologie (Me technik), Begriffe zurBeschreibung der Eigenschaften vonMe einrichtungen

Unbehauen, H.; Rao,G.P.

Identification of continuous system. Amster-dam: North Holland 1987

Unbehauen, H. Regelungstechnik I: Klassiche Verfahren zurAnalyse und Syntese linearen kontinuerli-cher Regelsysteme. Ediia 6. Braunschweig:Viewieg 1989

Unbehauen, H. Regelungstechnik II: Zustandsregelungen,digitale und nichtlineare Regelsysteme.Ediia 5. Braunschweig: Viewieg 1989

75


16/17

Unbehauen, H. Regelungstechnik III:Identifikation, Adapta-tion Optimierung. Ediia 3. Braunschweig:Viewieg 1988

Unbehauen, H. Stabilitat und Regel gute linearer undnichtlinearer Regler in einschleifigen Regel-kreisen bei verschiedenen Steckentypen mitP- oder I-Verhalten. (Fortschritt-BerichteReihe 8,13) Dusseldorf: VDI-Verlag 1970

Unbehauen, H. Ubericht uber Methoden zur Identification(Erkennung) dynamischer Systeme: Rege-

lungstechnik und Proce -Datenverarbeitung21 (1973) 2-8

VDI/VDE Richtlinie 3683: Beschreibung von Steuerun-gsaufgaben; Anleitung zum Erstellen einesPflichtenheftes. (1986)

Von Meiss, P. Automated Assembly Units for Microsystems

Walcher, H. Digitale Me technik. Dusseldorf: VDI-Verlag1974

Whitaker, H. Design of a model reference adaptive controlsystem for aircraft. Report R-164, Instru-mentation Lab., MITT, Boston 1958

Wiener, N. Cybernetics of control and communication in

the animal and the machine. MasachussetsInstitute of Technology: New York: JohnWiley 1948. (Deutsche Ausgabe DusseldorfEcon 1963)

Winget, J.L., Heights, Y. Pozition measuring transformer havingmeans for compensating errors in conductoralignament. Patent USA nr. 3.264.588 din02.08.1966

Wolter, 0.,Bayer, Th.,and Greschner, J. (1991)

Micromachined silicon sensors for scanningforce microscopy. Journal of VacuumScience and Technology, B9, 1353-7

Young, R. Y.: The Design of optical digital instruments;

Electronic Engineering, 1960, VI v. 32,N.338;

Ziegler, J.G.; Nichols,N. B.

Optimum settings for automatic controllers.Trans. ASME 64 (1942) 759-768

Zesch, W et al. Inertial Drives for Micro- and Nanorobots:Two Novel Mechanisms, Proc of Int. Symp.on Microrobotics and MicromechanicalSystems, Philadelphia, Pennsylvania, 1995,pp.80-88

76


17/17

Zimmermann, H.-J. undvon Altrock, C. (Hrsg)

Fuzzy Logic: Anwendungen, Oldenbourg,Munchen/Wien, 1994

xxx Prospecte ale firmelor: Mitutoyo - Japonia;Heidenhain - Germania; RSF - Elektronic -Austria; Teledyne - Gurley - USA; Sopelem- Frana; Muirhead Vactric - Anglia; Dyneer -USA; Itek - USA; Vermiteh - USA; Litton -Usa; Metrigraphics - USA.

77

biliografie primele pagini_ingienria instrumentatiei inteligente

Documents