raport cercetare ing 2010 - utcluj cercetare ing_ 2010.pdf2 proiecte câştigate în competitii...

1

UNIVERSITATEA DE NORD FACULTATEA DE INGINERIE BAIA MARE

Raport de cercetare pe anul 2010

Iniţiativa în atragerea de fonduri de cercetare prin proiecte depuse în competiţii naţionale

Neamţ, L., Nivelul expunerii populatiei din zona Baia Mare, Maramures la camp electromagnetic de joasa frecventa produs de infrastructura de alimentare cu energie, http://www.impreunapentrufiecare.ro/proiecte/37/#main, /2010

Matei, O., New Intelligent Methods for Solving Network Design Problems with Real Applications / 2010, Director proiect: Pop, P.

Iniţiativa în atragerea de fonduri de cercetare prin proiecte depuse în competiţii internaţionale

Dăscălescu, A., Reference number HUSKROUA/0901-RoUaSoil- Romania-Ukraine cross border area- The management of the contaminated sites with oil products, PI CBC Programme 2007-2013, Grand Application, , Aplicant Universitatea de Nord, parteneri Consiliul Judetean Maramures, Universitatea Nationala Tehnica de Petrol si Gaz Ivano Frankivsk, Agentia pentru Protectia Mediului Maramures, 22 septembrie, 2010

Neamţ, L., ERC-2011-StG_20101014 - The “Visualization” and Management of Urban Settlements Electromagnetic Fields from the Perspective of Eco-Friendly and Energy Efficiency for Sustainable Development

Proiecte câştigate în competiţii naţionale în calitate de coordonator

Ungureanu, N., Propunere Nr. 56661/ Cresterea competitivitatii tinerilor cercetatori in sprijinul societatii bazate pe cunoastere /2010

2

Proiecte câştigate în competitii internaţionale în calitate de partener şi coordonator

Cotetiu, A., POSDRU/96/6.2/ID64099, 2007-2013 - Integrare- calificare –transfer de inovaţii

pentru grupuri vulnerabile pe piaţa muncii, / 2010 Director proiect: Marinescu Lavinia Ungureanu, N., CEEPUS II-RO-0202-04-1011 - Implementation and utilization of e-learning

systems in study area of production engineering in Central European Region /2010 Ungureanu, N., CEEPUS II-SK-0030-06-1011 - From preparation to development,

implementation and utilisation of joint programs in study area of production engineering – contribution to higher flexibility and mobility of students in central european region, / 2010 Director proiect: Kuric Ivan.

Ungureanu, N., CEEPUS II-PL-0033-06-1011 - Development of mechanical engineering (design, technology and production management) as an essential base for progress in the area of small and medium companies’ logistics - research, preparation and implementation of joint programs of study., / 2010 Director proiect: Legutko, Stanislaw

Ungureanu, N., CEEPUS II-HR-0108-05-1011 - Concurrent Product and Technology Development - Teaching, Research and Implementation of Joint Programs Oriented in Production and Industrial Engineering.., / 2010 Director proiect: Barisic, Branimir

Proiecte/Contracte de cercetare încheiate/derulate

direct cu companii din ţară

o Banica, M., Contract nr. 559/02.03.2010, Studiu si solutie pentru calculele hidraulice la statiile de epurare 5000ELS si 12000ELS, valoare 5.800 lei

o Banica, M., Contract nr. 438/16.03.2010, Activitati de cercetare competitiva si precompetitiva: Lucrari de proiectare subansamble si componente in SolidWorks, valoare 2.000 lei.

o Banica, M., Contract nr. 3284/28.10.2010, Studiu si solutie pentru calculele hidraulice la statiile de epurare pentru obiectivul Husi, valoare 4.000 lei.

o Banica, M., Contract nr. 36/30.11.2010, Studiu privind metode de minimizare a cheltuielilor salariale ale managerilor din IMM-uri, valoare 4.000 lei.

o Cioban, H., Contract de cercetare nr. 538/12.03.2010, UNBM – „Studii si cercetări privind influenta repartizarii temperaturii in matritele de vulcanizare asupra calitatii produselor pentru industria auto”, valoare: 2691.75 lei.

o Cosma, M., Contract nr. 762/2010, Studii si cercetari privind optimizarea proceselor de reconditionare a pieselor complexe in atelierele de reparatii mecanice, valoare 2500 lei

o Lobonţiu, G., Lobonţiu, M., Bănică, M., Cosma, M., Petrovan, A., Ungureanu, M. Contract nr. 154 / 15.06.2010 - Creşterea capacităţii de management instituţional pentru activitatea de CD&I în domeniul ingineriei şi managementului tehnologic – finanţator ANCS (OI – POS CCE), valoare: 204.500 lei.

o Neamt, L., Contract nr. 18/25.05.2010, Consultanţă de specialitate, măsurători şi verificări de instalaţii energetice, precum şi implementare de noi aparate de verificări şi diagnoză în activitatea societăţii, valoare 1071 lei.

o Oniga, S., CEEX M3 AMSREI nr.: 1822/18.09.2007 - Monitorizarea acţiunii microbiotei solului in vederea utilizării ei in remedierea ecologica a iazurilor de decantare., valoare: 151878 lei. Director proiect: Marian Monica

o Oniga, S., Lung, C., Nr. 82/19.08.2008- Proiect de cooperare bilaterală Romania – Africa de Sud. Dezvoltarea unui sistem biofizic bazat pe Zeoliti-microorganisme -specii vegetale pentru Eco-remedierea iazurilor de decantare provenite din industria de preparare a minereurilor Auro-

3

argentifere – ZEMIP, / 2010, valoare: 76024 lei. Director proiect: Mihaly Cozmuta, Leonard

o Oprea, C., Barz, C., Contract nr. 52157/2008-2011 - Cercetari interdisciplinare privind corelaţia sol-planta, stabilirea unor factori de transfer pentru zone cu poluare istorica antropica, valoare: 79455 lei. Director proiect: Oprea Gabriela

o Ravai, N., S., Contract nr. 1957/14.07.2010, Încercări tehnologice la tracţiune cu dispozitiv de fixare – Ancore M12, valoare 660 lei.

o Ravai, N., S., Contract nr. 1957/14.07.2010, Încercări tehnologice la tracţiune cu dispozitiv de fixare – Izolator tracţiune ES-IT-24-00, trei încercări., valoare 360 lei.

o Ravai, N., S., Contract nr. 1998/16.07.2010, Încercări tehnologice la încovoiere cu dispozitive de fixare – Izolator susţinere ES-IS-24-00, trei încercări., valoare 600 lei.

o Ravai, N., S., Contract nr. 1997/16.07.2010, Încercări tehnologice la încovoiere cu dispozitive de fixare – Izolator aparataj ES-IA-24-00, trei încercări, valoare 600 lei.

o Ravai, N., S., Contract nr. 1999/16.07.2010, Încercări tehnologice la tracţiune cu dispozitiv de fixare – Izolator tracţiune ES-IT-24-00, şase încercări., valoare 720 lei.

o Ravai, N., S., Contract nr. 2077/21.07.2010, Încercări tehnologice la tracţiune cu dispozitiv de fixare – Izolator tracţiune ES-IT-24-00, trei încercări, valoare 360 lei.

o Ungureanu, N., Contract nr. 60 / 11.10.2010 - Curs instruire SSM, valoare: 13.080 lei. o Ungureanu, N., Contract nr. 61 / 11.10.2010 - Curs sanatatea in munca, valoare: 6.000 lei.

o Ungureanu, N., Contract nr. 365/29.09.2010, Evaluare nivel pregatire si instruire in SSM, valoare 20.000 lei.

Cărţi, cursuri publicate în edituri recunoscute în străinătate

Chiver O., Petrean L., Neamţ L., Erdei Z., COMPUTERS and SIMULATION in MODERN SCIENCE Volume III / Chapter 6: End Winding Inductance of Three-Phase A.C. Machines, pag. 67-76, ISSN: 1792-6882, ISBN: 978-960-474-267-7, WSEAS Press.

Neamţ L., Petrean L. E., Chiver O., Erdei Z., COMPUTERS and SIMULATION in MODERN SCIENCE Volume IV / Chapter 20: Power Transmission Line Magnetic Fields for different Phase Arrangements, pag. 216-226, ISSN: 1792-6882, ISBN: 978-960-474-267-7, WSEAS Press.

Cărţi, cursuri publicate în edituri recunoscute CNCSIS

Bîrle, V., Finanţe şi credit. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 978-606-536-101-0, pg. 332

Cosma, M., Aschierea cu freze cilindro-frontale cu cap sferic. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 987-606-536-070-9, pg. 216

Coteţiu, A., Chira, F., Management şi orientare în carieră. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 978-606-536-063-1, pg. 205

Coteţiu, R., Coteţiu, A., Managementul resurselor umane. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 978-606-536-064-8, pg. 232

Darabă, D., Ingineria refabricării echipamentelor tehnologice. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 978-606-536-103-4, pg. 206

Tisan, V., Dăscălescu, A., Indrumar pentru proiectarea mecanismelor, Editura RISOPRINT, Cluj-Napoca, cod CNCSIS 178, ISBN 978-973-53-0304-4, pg. 254

Ungureanu, N., Duval, P., Mocan, M., Taucen, I., Logistica activitatilor de mentenanta. Editura Universităţii de Nord din Baia Mare, 2010, ISBN 978-606-536-074-7, pg. 286

4

Articole publicate în reviste cotate ISI WEB OF SCIENCE (Institutul pentru Ştiinţa Informaţiei – Institute for Scientific Information din

Philadelphia) în anul 2010 ISSN

Nasui Vasile, Contributions to the development of the newest solutions of linear actuatingof electromechanic actuator for CNC machines and industrial robots, Metalurgia International, . vol. XV (2010), Special Issue no.7 pp. 16 -21, ISSN 1582-2214

Pop, N., Cioban, H. Horvat-Marc, A Finite element method used in contact problems with dry friction, Computational Materials Science, ISSN0927-0256

Toader Cezar, Increasing Reliability of Web Services, (Journal of) Control Engineering and Applied Informatics, Vol 12, nr. 4 / 2010, pag. 30-35 , ISSN 1454-8658, http://www.cncsis.ro/userfiles/file/ CENAPOSS/A_OCT_2010_FI.pdf

Articole publicate în străinătate în reviste indexate în baze de date

de prestigiu internaţional – BDI

Nasui V., Cotetiu R., Ungureranu, N. Studies of the Performances of Dynamic Regimen for the Electromechanic Actuators, Manufacturing Engineering, Vyrobne Inzinierstvo, cislo2, rocnik IX, 2010, pag 70-74, SK ISSN 1335-7972

G. Oprea, A. Michnea, C. Mihali, M. Şenilă, C. Roman, S. Jelea, C. Butean, C. Barz, Arsenic and Antimony Content in Soil and Plants from Baia Mare Area, Romania, American Journal of Environmental Sciences, Vol.6(1), p.33-40, 2010, http://www.contemporaryscienceassociation.net/ journal/view/1047

Articole publicate în volumele conferinţelor internaţionale indexate

ISI (Institutul pentru Ştiinţa Informaţiei – Institute for Scientific Information din Philadelphia) în anul 2010 ISSN

Boca, G.D., Daraba, D, A Solution to Improve Quality Products, Annals of DAAAM for

2010 & Proceedings of the 21st International DAAAM Symposium, Volume 21, No. 1, , DAAAM International, Vienna, Austria, EU, 2010, Vol. 20. pg. 907- 908, ISSN 1726-9679, ISBN 978-3-901509-73-5

Buchman A., Lung C., Horgos M., Tisan A., Oniga S., Evaluation of Load Generated Harmonics on Low Voltage Networks, Proceeding of the 10th WSEAS International Conference on Energy and Environment Technologies and Equipment (EEETE’10), pag. 46-50, ISSN 1790-5095 ISBN: 978-960-474-181-6

Chiver O., Petrean L.E., Neamţ L., Erdei Z. Study Regarding End Windings Inductance of Three Phase A.C. Windings in a Single Layer, Proceedings of the 10th WSEAS International Conference on Energy and Environment Technologies and Equipment (EEETE 10), p. 22-26, ISSN 1790-5095 ISBN: 978-960-474-181-6

Costea, C., Load Frequency Control using Multi-Agent Consensus, Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM, 2010, Pages 1269-1274 , ISSN: 1842-0133 ISBN: 978-1-4244-7019-8

Daraba , D., Boca, G.D., Experimental Assessment of the Milling Machine Column Before Remanufacturing, Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, Volume 21, No. 1, , DAAAM International, Vienna, Austria, EU, 2010, Vol. 20, pg. 733-734, ISSN 1726-9679, ISBN 978-3-901509-73-5

Drăgan, L., Chira, F., Crăciun, I, Kinematic modeling of the free human limbs, Proceedings of ModTech International Conference-New face of TMCR, Modern Technologies, Quality and Innovation, New face of T.M.C.R., Slănic Moldova, May 20-22, 2010 pp.255-259, Chişinău & Belgrad & Iaşi, ISSN 2066- 3919

5

Erdei Z., L.A. Dicso, Neamt L., Chiver O., Symbolic equation for linear analog electrical circuits using Matlab, WSEAS TRANSACTIONS on CIRCUITS and SYSTEMS Issue 7, Volume 9, pg.493-502, ISSN: 1109-2734

Erdei Z., Luiza Alexandra Dicso, Neamt L., Chiver O., Symbolic equation using Modified Nodal Analysis for linear electrical circuit using Matlab, Proceedings of the 4th EUROPEAN COMPUTING CONFERENCE, pg. 73-75, ISSN: 1790-5117, ISBN: 978-960-474-178-6

Horgoş M., Petrean L.E., Buchmann A., Neamţ L, Aspects of Voltage Dips, Causes of Production and Their Effect on Consummers, Proceedings of the 10th WSEAS International Conference on Energy and Environment Technologies and Equipment (EEETE 10), p. 40-45, ISSN 1790-5095 ISBN: 978-960-474-181-6

O. Matei and P.C. Pop, An efficient genetic algorithm for solving the generalized traveling salesman problem, International Conference on Intelligent Computer Communication and Processing, pp. 87-92, ISSN 978-1-4344-8229-0

Neamţ L., Petrean L. E., ChiverO., Erdei Z. The Influence of Phase Transposing on Double Circuit Overhead Power Line Magnetic Field, Proceedings of the 4th WSEAS European Computing Conference (ECC 10)” , Bucharest, Romania RECENT ADVANCES in ENERGY and ENVIRONMENTTECHNOLOGIES and EQUIPMENT, p. 35-39, ISSN 1790-5095 ISBN: 978-960-474-181-6

Oniga, S. Tisan, A. Lung, C. Buchman, A. Orha, I., Adaptive hardware-software co-design platform for fast prototyping of embedded systems, Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM, 2010, Article number 5510516, Pages 1004-1009 , ISSN: 1842-0133, ISBN: 978-1-4244-7019-8

Petrean L. E., Horgoş M., Buchmann A., Petrean L, PLENARY LECTURE : An Overwiev of How to Make Properly Harmonics Distortions Measurements in Medium Voltage Distribution System, Proceedings of the 10th WSEAS International Conference on Energy and Environment Technologies and Equipment (EEETE 10), p. 13, ISSN 1790-5095 ISBN: 978-960-474-181-6

P.C. Pop, O. Matei and C. Sabo, A New Approach for Solving the Generalized Traveling Salesman Problem, Lecture Notes in Computer Science, Vol. 6373, pp. 62-72, ISSN 0302-9743

P.C. Pop, O. Matei, C. Pop Sitar and C. Chira A genetic algorithm for solving the generalized vehicle routing problem, Lecture Notes in Artificial Intelligence, Vol. 6077, pp. 119-126, ISSN 0302-9743

RISTEIU, Mircea; ILEANA, Ioan; CABULEA, Lucia; Ungureanu, Nicolae, Implementing ieee 1451-based sensor for natural disaster monitoring, Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, Volume 21, No. 1, , DAAAM International, Vienna, Austria, EU, 2010, Vol. 20, pg. 237-238, ISSN 1726-9679, ISBN 978-3-901509-73-5

Sugar, I.R., Banica, M, Studies on the Reduction of Motor Vehicles Pollution by the Use of the Ceramic Materials, Proceedings of ModTech International Conference-New face of TMCR, Modern Technologies, Quality and Innovation, New face of T.M.C.R., Slănic Moldova, May 20-22, 2010, pag.595-598, ISSN 2066-3919

I.R. Şugar, L. A. Butnar, Research on growing the competitiveness index of spark ignition engines using ceramic materials, Proceedings of ModTech - International Conference - New face of TMCR Modern Technologies, Quality and Innovation - New face of TMCR, Slănic Moldova, pp. 591-pp. 594, issn 2066-3919

Tisan, A. Cirstea, M. Buchman, A. Parera, A. Oniga, S. Ilea, D., Holistic modeling, design and optimal digital control of a combined renewable power system, Proceedings of the International Symposium on Industrial Electronics (ISIE), 2010 IEEE, Page(s): 2733 – 2738, ISBN: 978-1-4244-6390-9

6

Tisan, A. Cirstea, M. Oniga, S. Buchman, A. Artificial olfaction system with hardware on-chip learning neural networks, Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM, 2010, Article number 5510453, Pages 884-889, ISSN: 1842-0133, ISBN: 978-1-4244-7019-8

Articole publicate în reviste de specialitate din străinătate

Cotetiu, A., Cotetiu, R., Ungureanu, N., Differential Equations for a Bistable Fluidic Amplifier with Different Phisical Nature Jets, Mechanical Engineering Letters, vol.3, 2009, Godollo, Hungary, , pag. 200-208, HU ISSN 2060-3789, CD-ROM, ISSN 2060-3797

Articole publicate în reviste româneşti recunoscute de CNCSIS ca şi reviste ştiinţifice de tip B+ sau B

Barz, Cr., Oprea, C., Contribution to the Tridimensional Analysis of Electromagnetic Field in Claw Poles Alternator, Journal of Electrical and Electronics Engineering, Vol. 3, Nr. 1, pg. 29-34, Oradea http://electroinf.uoradea.ro/reviste/default.html., ISSN 1844-6035

Buchman, Andrei, Buchman Attila, Sabou, S, Image Processing in Transform Domain: A Survey, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.01-04, http://ece.ubm.ro/cjece/index.html, ISSN 1844 – 9689

Chira Flavia, Bănică, M., Stoicoviciu, D., On the Computational Design Methods for Iprooving the Gear Transmission Performances, Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, p. 7-12, Baia Mare http://nordtech.ubm.ro/ , Cod CNCSIS 620, ISSN 1224-3264, 2010.

Chiver O., Neamţ L., Erdei Z. and Cristian Barz, Induction motor analysis by finite elements method, Journal of Electrical and Electronics Engineering, vol.3, no.2, p.51-54 http://electroinf.uoradea.ro/reviste/default.htm, ISSN 1844-6035,

Ioana Crăciun, Dinu Stoicovici, Mircea Horgoş, About The Transitory Regime of the Mining Extraction Machine, Annals of the University of Petrosani - mechanical engineering, 12 (2010), pag. 59-64. http://www.upet.ro/annals/mechanical/, ISSN1454-9166

Costea, C., Distributed Constraint Optimization in Microgrid Operations, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.13-16, http://ece.ubm.ro/cjece/index.html, ISSN 1844 – 9689

Cotetiu, R., Nasui V., Analysis of the evolution of roumanian economy before economic crisis, Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, p. 13-18, Baia Mare http://nordtech.ubm.ro/ , Cod CNCSIS 620, ISSN 1224-3264, 2010

Dascalescu A., Ungureanu M., CAD - CAM programs applied to the cycloid profile wheels processing, Annals of the University of Petrosani - mechanical engineering, 12 (2010), pag. 65-70. http://www.upet.ro/annals/mechanical/, ISSN1454-9166

Lobonţiu, M., Diciuc V. – Contributions Towards the Concept of Metal Cutting Tribosystem. Proceedings of the International Conference “NEW TECHNOLOGIES IN MANUFACTURING –NewTech 2009; The Annals of “DUNĂREA DE JOS” University of Galaţi, Fascicle V, YEAR XXVII (XXXII) 2009, ISSN 1221–4566, p.199-205, (B+, COD CNCSIS 81).

C. Lung, S. Sabou, I. Orha, An. Buchman, FPGA Implementation of a Linearization Algorithm for Sharp GP2D120, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.57-60, http://ece.ubm.ro/cjece/index.html , ISSN: 1844-9689

7

Nasui, V., Experimental stand for the study of the applications of fuzzy logistics in the research of the electro-mechanic actuators‘ dynamics., Buletinul Institutului Politehnic Iasi Machine Manufacturing Series. Technical University of Iaşi. ’’Gheorghe Asachi’’ pg . 147-155 http://www.cm.tuiasi.ro/docs/CM%202010%20fasc%201%20romana.pdf, ISSN 1011-2855-53-55

Oprea, C., Barz, Cr., Regulation after speed of the synchronous motor asynchronized, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.85-88. http://ece.ubm.ro/cjece/index.html , ISSN: 1844-9689

Oprea, C., Barz, Cr., Sereghi, Al., Contributionts to the Implementation of the Telemetric Programmable Automats by RTU TYPE for Automation, monitoring and control Installations , Annals of FACULTY ENGINEERING HUNEDOARA Tome VIII , Fascicule 3, pg. 37-44, http://annals.fih.upt.ro/pdf-full/2010/ANNALS-2010-3-07.pdf ISSN 1584-2665

I. Orha , S. Sabou, C. Lung, Analysis and modeling of Transformerless Photovoltaic Inverter Systems with PSIM and MATLAB/SIMULINK, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.89-94, http://ece.ubm.ro/cjece/index.html, ISSN: 1844-9689

Petrovan, A., Costea, C., PERT and Fuzzy PERT Methods on Project Scheduling under Uncertainty, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.99-102, http://ece.ubm.ro/cjece/index.html, ISSN 1844 – 9689

Ravai Nagy, S., Lobonţiu, M, Manufacture of gears with asymmetric teeth on CNC machine tools, Annals of the Oradea University, Fascicle of Management and Technological Engineering, IMT Oradea, pag.212-218, http://imtuoradea.ro/auo.fmte/, ISSN 1583-0691

S. Sabou, I. Orha , C. Lung, An. Buchman, Autonomous navigation system – map matching, Carpathian Journal of Electronic and Computer Engineering, Volume 3, Number 1, pag.107-112, http://ece.ubm.ro/cjece/index.html, ISSN: 1844-9689

Ungurenu N., Ungureanu M., Cotetiu A., Barisic B., Grozav, S., Principels of maintenance Management, Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, p. 69-72, Baia Mare http://nordtech.ubm.ro/ , Cod CNCSIS 620, ISSN 1224-3264, 2010.

Lucrări publicate în volumele simpozioanelor internaţionale cu

referenţi ştiinţifici şi recunoscute în domeniul de ştiinţă respectiv în anul 2010

Alexandrescu, M., Coteţiu, R., Coteţiu, A., Darabă, D., Inssues Concerning the influence of Revolutions and Static and Dynamic Loading on a Radial HD Bearing, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pp. 17 – pp. 20, http://eng.ubm.ro/cisi/index.html

Alexandrescu, I., M., Cotetiu, R., Cotetiu, A., Daraba, D., Influence of Revolutions and Static and Dynamic Loading on a Radial HD Bearing, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th edition, North University of Baia Mare, pp 7- pp.12, http://eng.ubm.ro/cisi/index.html

Barz, Cr., Oprea, C., Study of electromagnetic field in claw-poles alternator, International Symposium on Advanced Engineering and Applied Management – 40th Anniversary in Higher Education, CD, Hunedoara

Banica, M., Sugar, I.R. Research on Increasing the Effective Power and the Efficiency of Spark Ignition Engines, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pp. 17 – pp. 20, http://eng.ubm.ro/cisi/index.html

8

Banica, M., Chira, F. Using Genetic Algorithms to Design Asymmetric Involute Gear, 7th International Conference on Applied Mathematics, 1-4 Sept., 2010, Baia Mare, Minisymposium 3. Optimization Theory, Operations Research and Applications, Abstracts: pag. 37, http://icam.ubm.ro/

Bonţiu Pop, A. B, Pop, G. I. The Cutting Process Simulation Using Finite Element Analysis For Different Cutting Conditions, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pag. 35-41, http://eng.ubm.ro/cisi/index.html

Bonţiu Pop, A. B, Pop, G. I. Analysis On Influence Of The Tool Geometrical Parameters On The Cutting Process Using Finite Element Simulation, Proceedings of The 11th International Conference „Automation in Production Planning and Manufacturing“, Zilina 2010, pag 203-207

Chiver O., Neamţ L., Erdei Z., Pop Eleonora Considerations regarding asynchronous motor rotor parameters determination by FEM Proceedings of International Symposium on Embedded Systems Design and Applications, ESDA , Baia Mare, Romania

Cioban, H., Butnar, L. Studies on globoidal and elipsoidal worm gears using dynamic simulation, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pp. 41 – pp. 46, http://eng.ubm.ro/cisi/index.html

Cotetiu, R. Analysis of the Manufacturing Sector in Rom anian Before Economic Crisis, The 10th International Conference New Ways in Manufacturing Technologies 2010, Presov, Slovakia, pp.61-64

Darabă, D., Cosma, M., Alexandrescu, M., Some aspects on the design of the technological equipment, in order to be remanufactured, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pag. 63 – 68, http://eng.ubm.ro/cisi/index.html

Dascalescu, A. The Analyse from Dynamic Point of View of the Satellite’s Cycloid Profile Limits, OGET 2010, 18th International Conferince on Mechanical Engineering, pag.96-99, http://www.emt.ro/oget/ro/

Diciuc Vlad ,Lobontiu Mirceacosma Marius Optimization of cutting conditions when five axis milling using ball nose end mills.teoretical study, Proceedings in Manufacturing Systems , No. 1, Vol. 5. pp. 81-86 Ed. Academiei Romane

Drăgan, L. Theoretical and experimental research about linear pneumatic actuators with cylindrical membrane and braided shel, ISI Proceedings of IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2010 - THETA 17th edition, Tome III, May 28-30, pp. 255-261, http://aqtr.ro

Zoltan Erdei, Paul Borlan, Olivian Chiver Comparison between basic analog and digital filters, Symposium on Embedded Systems Design and Applications, ESDA , Baia Mare, Romania

Grozav S., Ungureanu N., Oprea O., The relative spiral feed and contact contour development in manufacturing during cold orbital deformation, Proceedings of The International conference of the Carpathian Euroregion Specialists in Industrial Systems

Lobonţiu Gabriela ,Lobonţiu Mircea Creating technological competencies on market demand- case study, Proceedings of The 6th International Seminar on the Quality Management in Higher Education

Lobonţiu Mircea, Paşca Ioan Influence of tool axis inclination angle on the surface roughness in ball end milling of olc 45 (c45) material, Proceedings in Manufacturing Systems , No. 1, Vol. 5. Proceedings in Manufacturing Systems , No. 1, Vol. 5., pp. 39-44 Ed. Academiei Romane

9

C.Lung, S.Sabou, I. Orha, An. Buchman ZigBee Smart Sensors Networks, International Symposium for Design and Technology of Electronic Packages, SIITME 2010, 16th Edition, Pitesti, Romania, , p. 309-312 http://www.siitme.ro ISBN 978-1-4244-8122-4/10/

O. Matei, Robot Localization Using Neural Networks International Symposium on Embedded Systems Design and Applications http://ece.ubm.ro/esda10/ ISBN978 - 606 - 536 - 096 – 9

Mihaly Cozmuta, A., L. Mihaly Cozmuta, L, Varga, Şugar, I.R. Mathematical models used in prediction of hydroxymethylfurfural(hmf) formation during the thermal processing of honey, 7th International Conference on Applied Mathematics, 1-4 Sept., 2010, Baia Mare, Minisymposium 3. Optimization Theory, Operations Research and Applications, http://icam.ubm.ro/

Năsui V., Cotetiu R.,Ungureanu, N. Studies of the performances of dtnamic regimen for electromechanic actuators, The International Scienctific Conference, 10th edition, New Ways in Manufacturing Technologies Proceedings. Preşov pp. 405-410. Technical University of Kosice

Năsui, V. Appreciating the solutions of project using the variable functions. The 14th International Conference “INVENTICA 2010”. Editura Performantica Iasi, pp. 445 - 449.

Năsui Vasile, Coteţiu Radu Lobonţiu Mircea,Ungureanu Nicolae The dynamic parameters in designing of linear electromechanic actuators, Proceedings in Manufacturing Systems , Special number, Vol. 5. pp. 305-308 Ed. Academiei Romane

Năsui V., Ungureanu, N Linear electromecanic actuator performance formulation., CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pp. 193–198 http://eng.ubm.ro/cisi/index.html

Neamţ L, Dezsi A Proiectarea optimală a motorului pas cu pas Simpozionul National cu participare internationala „Interferente” Baia Mare, Mai 2010

Neamţ L, Deszi A Switched reluctance motor optimal geometry design Proceedings of International Symposium on Embedded Systems Design and Applications, ESDA 13-15 May 2010, Baia Mare ISBN: 978 - 606 - 536 - 096 – 9

Oprea, C., Barz, Cr., The contributions at modeling sincron machine through utilization of labview language, Proceeding: “The International Conference of The Carpathian Euro-Region Specialists in Industrial Systems” – 8_th EDITION, CEURSIS 2010, pg. 217-220, Baia Mare

Oprea, C., Barz, Cr., Contribution to automate regulation after the speed of actions with asynchronized synchronous motor, International Symposium on Advanced Engineering and Applied Management – 40th Anniversary in Higher Education, CD, Hunedoara.

Ravai Nagy, S., Lobonţiu, M., Medan, N. Test bench with high pressure water for study cleaning nozzles, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th Edition, 12-14 May 2010, Baia Mare, Romania, pag. 251 – 256, http://eng.ubm.ro/cisi/index.html

Ravai Nagy, S., Lobonţiu, M., Medan, N. Test bench with high pressure water for study cleaning nozzles, CEURSIS 2010, Proceedings of The International Conference of the Carpathian Euro 8th Edition

Sugar, I.R., Banica, M. Research on Growing the Competitiveness Index of Spark Ignition Engines Using Ceramic Materials, Proceedings of 10th International Conference On Advanced Manufacturing Operations, Varna, Bulgaria, 27-29 June, http://www.euagenda.eu/2010/6/27/AMO-10

Şugar, I.R., Mihaly Cozmuţa, A., Macavei, R. study on the use of ultrasound for washing and cleaning in food industry, Proceedings of The International Conference BIOATLAS

10

2010 Transilvania University of Brasov, (Journals of EcoAgricTourism, vol. 6 (2010), Nr. 4 (21), pag.45-48)

Mioriţa Ungureanu, Nicolae Ungureanu, Vlad Vasilov Study of Tensions and Deformations for Overhead Crane Brakes, 10th International Scientific Conference, New Ways in Manufacturing Technologies, Proceedings Preov , Slovak Republic, www.tuke.sk/fvtpo/nwmt

Ungureanu,M., Ungureanu, N., Stoicovici, D. The thermal regime study for the overhead crane brakes11th International Scientific Conference Automation in production planning and manufacturing, University of Zilina, Faculty of Mechanical Engineering, pg 240 – 245. In Framework Of Internatonal Proiect CEPUS CII-SK30-05-0910, Zilina-Valca, Slovak Republic www.visegradfund.org

Ungureanu, N., Ungureanu, M., Cotetiu, A., Barisic, B., Grozav, S., Principles of the

Maintenance Management, International Conference of the Carpathian Euro-Region Specialists in Industrial Systems, 8th edition, North University of Baia Mare, pp 293 - pp. 296, http://eng.ubm.ro/cisi/index.html

Ungureanu, N., Nasui V., Ungureanu, M., Cotetiu R., Alexandrescu, N. Considerations about maintenance position in industral companies, The International Scienctific Conference, 10th edition, New Ways in Manufacturing Technologies Proceedings. Preşov. pp. 65-68. Technical University of Kosice. WWW.tuke.sk/fvtpo/nwmt

Ungureanu, N., Nasui,V., Ungureanu, M., Cotetiu, R., Alexandrescu, M. Consideratii privind sistemele de mentenanta corective, The Symposion with International partipacipation Proceedings Durability and Realibility of Mechanichal Systems Targu Jiu Editura Academia Brancusi, cod CNCSIS 255, pp .602-607

Ungureanu N., Scheduling Models of Industrial Activities, 11th International Scientific Conference Automation in Production Planning and Manufacturing, University of Zilina, Faculty of Mechanical Engineering, www.visegradfund.org

Brevete de invenţie sub protecţie pe plan naţional

Năsui Vasile, Actuator mecanism liniar multiaxial.. Brevet de Inventie RO 122846 B1 (30.03.2010).

Premii internaţionale obţinute printr-un proces de selecţie în anul 2010

Prof. univ. dr. ing. Vasile NĂSUI Medalia de aur. Actuator mecanism liniar multiaxial. Salonul Internaţional de Invenţii, Cercetare

Ştiinţifică şi Tehnologii Noi „INVENTIKA-2010”, patronaj: Ministerului Educaţiei, Cercetării şi Inovării şi al Salonului Internaţional al Invenţiilor, Tehnicilor şi Produselor Noi Geneva, statut de eveniment oficial al Organizaţiei Mondiale pentru Proprietate Intelectuală–OMPI. website: www.ancs.ro

Medalia de bronz, Actuator mecanism liniar multiaxial. A 59-a editie Concurs Internaţional Bruxelles–EUREKA dedicat inventicii, Salon INNOVA, 18-20.10 2010 Bruxelles, BELGIA

Diploma Medalia Meritul Inventiv Inventica.: The 14th International Exhibition of Research, Innovation and Technological Transfer “INVENTICA 2010”. 9-11 June, Iasi

Diploma de excelenţă si Medalia de Aur Grup de inventii Grup Actuatori, Salonul Internaţional de Inventică Pro Invent Cluj - Napoca, ediţia a VIII-a. 27.03. 2010

Medalia de aur Actuator mecanism liniar multiaxial, Salonul Internaţional de Inventică Pro Invent Cluj - Napoca, ediţia a VIII-a. 27.03. 2010

11

Premii obţinute la nivel naţional: premiile Academiei Române, Premiile acordate de CNCSIS şi premiile acordate de Uniunile de

creaţie Năsui Vasile, ’’Premierea rezultatelor cercetarii-Tip Brevet” Cod CNCSIS 253. Mecanism

actuator intinzator de banda. PNII - Program Resurse umane, CNCSIS-UEFISCSU - Aplicatie PN-II-RU-PRECBT-2009-3. 2000 lei. http://www.cncsis.ro/Public/cat/471/Premierea 2010

Năsui Vasile, ’’Premierea rezultatelor cercetarii-Tip Brevet” Cod CNCSIS 254. Stand de proba pentru incercarea in sarcina a modulelor de translatie. PNII - Program Resurse umane, CNCSIS-UEFISCSU - Aplicatie PN-II-RU-PRECBT-2009-3. 2000 lei. http://www.cncsis.ro/Public/cat/471/Premierea 2010

Năsui Vasile, Diploma PRO FACULTATE acordată de Facultatea de Inginerie Mecanică din Godollo, Ungaria 2010

Finalizarea doctoratului

Cristian BARZ, 16.12.2010, ,,Studiul teoretic şi experimental al alternatoarelor cu poli gheară’’, Prof. univ. dr. ing. Vasile IANCU

Cristinel Eduard COSTEA, 02.10.2010, „Aplicaţii multi-agent în conducerea sistemelor complexe”, prof.univ.dr.ing. Corneliu BOŢAN

Vlad DICIUC, Tribosistemul de aşchiere cu freză cu cap sferic, prof.univ.dr.ing. Lobonţiu Mircea

Coordonarea de doctoranzi în cadrul IOD UNBM Prof. univ. dr. ing. Mircea LOBONŢIU

11 doctoranzi in stagiu Prof. univ. dr. ing. Vasile NASUI

6 doctoranzi in stagiu

Membru în colectivele de redacţie şi referent ştiinţific la reviste cotate ISI sau incluse în baze de date internaţionale în străinătate şi expert de evaluare proiecte în programe

internaţionale pe anul 2010

Coteţiu R., Manufacturing Engineering Vyrobne Inzinierstvo 2010, číslo 1, ročník IX / 2010, Technical University of Košice, ISSN -1335-7972, http://web.tuke.sk/fvtpo/casopis/




Coteţiu R., Mechanical Engineering Letters, (2010), Szent Istvan University, Godollo, HU ISSN 2060-3789. http://www.gek.szie.hu/.

Coteţiu R., Referent ştiinţific la revista STROJARSTVO, Journal for Theory and Application in Mechanical Engineering, Zagreb 2010, Croatia. Reviewing manuscript 1561.

Ungureanu N., Referent ştiinţific la Engineering Review, Rijeka , Croatia, ISSN 0350-722X. Ungureanu N., Referent ştiinţific la Measurement Journal of the International Measurement

Confederation (IMEKO) , ISSN: 0263-2241, Imprint: ELSEVIER. Oniga S., Membru al International Editorial Board, International Review of Applied Sciences and

Engineering, Facultatea de Inginerie a Universităţii din Debrecen, Ungaria, http://www.mfk.unideb.hu/index.php?/international-review-of-applied-sciences-and-engineering-irase.html

12

Horgoş M., Evaluator CEEPUS acreditat 2010

Membru în colectivele de redacţie şi referent ştiinţific la reviste de categoria B+, B şi C în anul 2010, expert de evaluare proiecte

în programe naţionale în anul 2010

Coteţiu R., Proceedings in Manufacturing Systems, ICMaS 2010, ADEMS Universitatea Tehnica din Cluj; Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, Baia Mare, http://nordtech.ubm.ro/

Lobonţiu M., Revista de Management şi Inginerie Economică, Indexed in ULRICH’S Periodicals Directory, Indexed in EBSCO Business Source(r) Complete database, Index Copernicus, ISSN 1583-624X, Asociaţia Managerilor şi Inginerilor Economişti din România. ( B+, cod CNCSIS 79).( http://www.rmee.amier.org/abstracting.htm); Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, Baia Mare, http://nordtech.ubm.ro/.

Nasui V., Proceedings in Manufacturing Systems, ICMaS 2010, ADEMS Universitatea Tehnica din Cluj; Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, Baia Mare, http://nordtech.ubm.ro/.

Ungureanu N., Membru Annals of the University of Petrosani, ISSN145-9166; Membru Durability and Reliability of Mechanical Systems , Tg Jiu, ISBN 978-973-144-350-8; Proceedings in Manufacturing Systems, ICMaS 2010, ADEMS Universitatea Tehnica din Cluj.

Petrean L., Oprea C., Peter D. C., Oniga S., Buchman A., Tisan A., Lung C. Carpathian Journal of Electronic and Computer Engineering, http://ece.ubm.ro/cjece/.

Oprea C., Buletin Stiinţific seria C –Mecanică, Tribologie, Tehnologia construcţiilor de maşini- Volumul XXIV, Baia Mare, http://nordtech.ubm.ro/.

Horgoş M., Expert ARACIS, acreditat 2010

Secretar stiintific,

Prof. dr. ing. Constantin OPREA

raport cercetare ing 2010 - utcluj cercetare ing_ 2010.pdf2 proiecte câştigate în competitii...

Documents