UNIVERSITATEA DE NORD FACULTATEA

DIN BAIA MARE DE INGINERIE

RAPORT DE CERCETARE PE ANUL 2011

Contracte obţinute/derulate prin competiţii naţionale CERCETARI INTERDISCIPLINARE PRIVIND CORELATIA SOL-PLANTA,

STABILIREA UNOR FACTORI DE TRANSFER PENTRU ZONE CU POLUARE ISTORICA ANTROPICA, Contract 52157 2008/2011, Val.2011 = 142003 LEI. Colectiv UNBM: G. Oprea, C Mihali, C Butean, Cr. Barz, M Jelea, S Jelea, O Mare, A Michnea, L Mihalescu, C Pop, F Pop, N Pop, C. Oprea, A Terec, G Vâtcă, V Viman

Proiecte câştigate în competitii internaţionale în calitate de partener şi coordonator

RoUaSoil-Romania-Ukraine cross border area-The management of the contaminated sites with oil products. Director proiect: Dascalescu Anamaria; Valoarea proiectului: 2011, 1.134.000 LEI, Proiect HUSKROUA 1001/110.

Noi metode hibride metaeuristice pentru rezolvarea problemelor de proiectare a retelelor; Director proiect: Pop Petrica; Matei Oliviu; Valoarea proiectului: 2011, 70.000 LEI,

Proiecte/Contracte de cercetare încheiate/derulate direct cu companii din ţară

Banica Mihai-Studiu si solutie pentru calculele hidraulice la statia de epurare pentru obiectivul Borod, Contract 1975/22.07.11, Valoare 1.500 lei;

Banica Mihai-Studiu si solutie pentru calculele hidraulice la statiile de epurare pentru obiectivul Husi, Contract nr. 3284/28.10.10, Valoare: 4.000 lei;

Chiver Olivian-Servicii de proiectare si consultanta de specialitate pentru realizarea de instalatii electrice si energetice-CTR.MFD ELAG, Contract nr. 1339/31.05.2011, Valoare: 3.000 lei;

1

Cosma Marius-Studiu privind evaluarea proceselor tehnologice de prelucrare prin aschiere si evidentierea posibilitatilor de optimizare a acestora-Contract nr. 861/06.04.11, Valoare: 2.500 lei;

Cosma Marius-Curs de formare “Operator la masini-unelte cu comanda numerica”, Contract nr. 2807/20.10.11, Valoare: 40.000 lei;

Daraba Dinu-Studii si cercetari privind optimizarea activitatii de transport pe baza teoriei drumurilor optime-Contract nr. 858/06.04.11, Valoare: 2.500 lei;

Lobontiu Gabriela-Studiu privind metode de minimizare a cheltuielilor salariale ale managerilor din IMM-uri-Contract nr. 36/30.11.10, Valoare: 4.000 lei;

Lobontiu Mircea-Activitati de cercetare competitiva a produsului autocombinata 2+3mc si a instalatiei electrice de comanda a autovidanjei de 5mc-Contract nr. 1982/25.07.11, Valoare: 40.000 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la tractiune cu dispozitiv de fixare a piesei “Izolator tractiune” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L-Contract nr. 414/14.02.11, Valoare: 960 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la tractiune cu dispozitiv de fixare a piesei “Lant simplu de intindere ES-LSI-24/2” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L-Contract nr. 1033/27.04.11, Valoare: 720 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la tractiune cu dispozitiv de fixare a piesei “Lant dublu de intindere ES-LDI-24/2” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L.-1034/27.04.11, Valoare: 720 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la tractiune cu dispozitiv de fixare a piesei “Izolator tractiune ES-IT-24-00” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L.-1110/09.05.11, Valoare: 480 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la incovoiere a piesei “Izolator sustinere ESIS-24 cu clema C” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L.-1330/30.05.11, Valoare: 450 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la incovoiere a piesei “Izolator sustinere ESIS-24 cu clema C” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L.-1435/08.06.11, Valoare: 600 lei;

Ravai Nagy Sandor-Studii si incercari tehnologice la tractiune a piesei “Izolator de suspensie siliconic (Composite suspension and tension insulatoe)ES-IT-4-E-24-00” in vederea asimilarii in productie de catre S.C. ELECTRO SISTEM S.R.L.-2170/18.08.11, Valoare: 720 lei;

2

Articole ISI, publicate in reviste cotate ISI în anul 2011 Ungureanu, N, Ungureanu, M., Cotetiu, R., Grozav, S., Risteiu, M.,

Contributions Regarding the Mining Driling Tribo-System, Rev. Archives of Mining Sciences, Volume 56, Issue 3, Pages: 527-535, Published: 2011, http://mining.archives.pl., ISSN 0860-7001.

Grozav, S., Ungureanu, N., Gligor, G., Oprea, O., CAM System For Modelling, Design And Simulate The Process Of Extrusion For Small Pieces Used In Mining Industry, Rev. Archives of Mining Sciences, Volume 56, Issue: 2, Pages: 213-222, Published: 2011, http://mining.archives.pl., ISSN 0860-7001.

Pop, N., Cioban, H., Horvat-Marc, A., Finite element method used in contact problems with dry friction, Rev: COMPUTATIONAL MATERIALS SCIENCE, Volume: 50, Issue: 4, Pages: 1283-1285, DOI: 10.1016/j.commatsci.2010.03.018, Published: FEB 2011, ISSN 0927-0256.

Lucrari stiintifice publicate in reviste straine din fluxul principal de publicații, indexate BDI

Cotetiu, R., Cotetiu, A., The Lubricant Type Influence on the Lubricant Type on the Values of Friction Coefficient in Rolling Couples Steel, Rev: Manufacturing Engineering Published by Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, No.3, 2011, Volume X, pg.54-58, BDI: CSA (Cambridge Scientific Abstracts), Engineering Research Database, CSA Technology Research Database, Mechanical &Transportation Engineering Abstracts, Genamics JournalSeek, Google Scholar, IndexCopernicus Journals Master list Open J-Gate, Ulrich's International Periodicals Directory; Link: www.tuke.sk/fvtpo/journal, ISSN 1335-7972.

Lucrări științifice publicate in extenso in volumele conferintelor internationale cotate ISI si/sau cele organizate de societati profesionale internationale

Banica, M., Sugar, I.R., Research on the Effect the Composite Materials have on Reducing Traffic Noise Pollution of Motor Vehicles, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, pg.61-64, Link: http://www.modtech.ro, ISSN 2069-6736.

Butnar, L., Cioban, H., Researches for surface quality cutted through precision normal punching, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, pg.153-156, Link: http://www.modtech.ro, ISSN 2069-6736.

Butnar, L., Sugar, R., Theoretical and experimental researches for friction coefficient determination in alluminium extrusion, Proceedings of the 15th

3

International Conference Modern Technologies, Quality and Inovation, ModTech 2011, pg.157-160, Link: http://www.modtech.ro, ISSN 2069-6736.

Cioban, H., Butnar, L., Pop, Gh., Dynamic simulation of the swing unit from a robot welding line, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, pg.233-236, Link: http://www.modtech.ro, ISSN 2069-6736.

Lobontiu, G., Competitive Strategies applied by the Small Business Sector from Baia Mare, Vol: Proceedings of the 2nd Review of Management and Economic Engineering International Management Conference ”Management of Crisis or Crisis of Management?”, September 2011, Link: http://conference2011.rmee.org/, ISSN 2247-8639.

Lobontiu, M, Hagan, V., Pasca, I., Experimental research about evolution of surface roughness and time for different value of radial cutting depth in ball end milling of C45 material, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, Link: http://www.modtech.ro, ISSN 2069-6736.

Melian, C., Deprez, P., Breaban, F., Lobontiu, M., Influence of technological parameters of laser engraving on shape crater glass surface, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, Link: http://www.modtech.ro, ISSN 2069-6736.

Pasca, I., Lobontiu, M., Experimental research and mathematical modeling on the surface roughness in ball end milling of C45 material, Proceedings of the 15th International Conference Modern Technologies, Quality and Inovation, ModTech 2011, Link: http://www.modtech.ro, ISSN 2069-6736.

Petrovan, A., Lobontiu, M., Ontology engineering in product development, Vol: Proceedings of the 2nd Review of Management and Economic Engineering International Management Conference ”Management of Crisis or Crisis of Management?”, September 2011, Link: http://conference2011.rmee.org/, ISSN 2247-8639.

Claudiu Lung, Sebastian Sabou, Ioan Orha, Communication control system implemented in FPGA, International Symposium for Design and Technology of Electronic Packages, SIITME 2011, pg. 245-248, Link: www.siitme.ro/SIITME2010/, E-ISBN: 978-1-4577-1275-3, PrintISBN: 978-1-4577-1276-0, INSPEC Accession Number: 12440665, Digital Object Identifier: 10.1109/SIITME.2011.6102727.

P.C. Pop and O. Matei, An Improved Heuristic for the Bandwidth Minimization Based on Genetic Programming, Vol: Proc. of HAIS 2011, Part II, Editors E.S. Corchado Rodriguez et al., Lecture Notes in Artificial Intelligence, Springer, Vol. 6079, pp. 67-74, 2011, http://hais.pwr.wroc.pl/, ISBN 978-3-642-21221-5.

P.C. Pop, O. Matei and H. Valean, An Efficient Soft Computing Approach to the Generalized Vehicle Routing Problem, Vol: Advances in Intelligent and Soft Computing, Springer, Vol. 87, pp. 281-289, 2011, http://soco.usal.es/soco2011/, ISBN 978-3-642-19643-0.

4

P.C. Pop, O. Matei and C. Sabo, A Memetic Algorithm for Solving the Generalized Minimum Spanning Tree Problem, http://www.dep.uminho.pt/wsc15/, ISSN 1867-5662.

Lucrări științifice publicate in reviste de specialitate din strainatate

Oprea G., Michnea A., Mihali C., Senila M., Roman C., Jelea S., Butean C., Barz C., Arsenic and Antimony Content in Soil and Plants from Baia Mare Area, Romania, American Journal of Environmental Sciences 6 (1), pag.33-40, New York, USA, ISSN 1553-345X.

Butnar, L., Cioban, H., Eberst, O., Influence of tool-piece friction on material flow in inverse extrusion, Mechanical Engineering Letters, Technical Scientific Journal of the Mechanical Engineering Faculty, Szent Istvan Faculty, Godollo, Hungary, volume 5, pg.115-120, www.gek.szie.hu, Hu ISSN 2060-3789, CD-ROM ISSN 2060-3797.

Cotetiu, R., Cotetiu, A., Theoretical and Experimental Analysis of Rolling Worm gears efficiency, Mechanical Engineering Letters, Technical Scientific Journal of the Mechanical Engineering Faculty, Szent Istvan Faculty, Godollo, Hungary, volume 5, pag.166-169, www.gek.szie.hu, Hu ISSN 2060-3789, CD-ROM ISSN 2060-3797.

Ungureanu, N., Cotetiu, R., Eberst, O., Management of Spare Pieces for Worn aut PG 80 using Pareto Method, Mechanical Engineering Letters, Technical Scientific Journal of the Mechanical Engineering Faculty, Szent Istvan Faculty, Godollo, Hungary, volume 5, pg.135-138, www.gek.szie.hu, Hu ISSN 2060-3789, CD-ROM ISSN 2060-3797.

Articole publicate în reviste româneşti recunoscute de CNCSIS ca şi reviste ştiinţifice de tip B+ sau B

Banica, M., Chira, F.-Using Genetic Algorithms to Design Asymmetric Involute Gear, Scientific Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Cristian BARZ, Constantin OPREA-The theoretical and experimental study of claw pole alternators, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

Cristian BARZ, Constantin OPREA, Study of electromagnetic field in claw-poles alternator, ANNALS OF FACULTY ENGINEERING HUNEDOARA-INTERNATIONAL JOURNAL OF ENGINEERING, Tome IX, Fascicule 3, http://annals.fih.upt.ro, ISSN 1584-2665, (B+, COD CNCSIS 299).

5

Chiver Olivian, Neamt Liviu, Horgos Mircea, Finite elements analysis of a Shell-Type transformer, Journal of electrical and electronics engineering, Vol4/nr.2/2011, ISSN 1844-6035, (B+, COD CNCSIS 865).

O. Chiver, L. Neamt, M. Horgos, S. Oniga and A. Buchman, The Study of Transient Regimes for a Shell-Type Transformer, Journal of electrical and electronics engineering, Vol4/nr.2/2011, ISSN 1844-6035, (B+, COD CNCSIS 865).

Cotetiu, R., Cotetiu, A., Nasui, V., The influence of the surface finished state on the metal on poliamidic couples in rolling friction, Scientific Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Craciun, I., On dynamical power for mechanical systems with designed acceleration profiles which limit jerk, Scientific Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Domide Gherasim Solovestru, Consideraţii privind piaţa românească de brokeraj în asigurări în contextul crizei financiare, REVISTA DE ECONOMIE TEORETICA SI APLICATA, Supliment http://ideas.repec.org/a/agr/journl/, v5(558)(supplement)y2011i5(558)(supplement), pg. 201-206, ISSN1841-8678, 1844-0029 (e) (B+, COD CNCSIS 832).

Claudiu Lung, Intelligent thermometer with speech function implemented in FPGA Technology, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

Nasui, V., Cotetiu, R., Lobontiu, M., Ungureanu, N., About Modelling the Fuzzy Control with Reaction Position Force with the Electromechanical Actuators, Journal Proceedings in Manufacturing Systems, Volume 6, Issue 4, 2011, pg.233-238, http://www.icmas.eu/index.htm, ISSN 2067-9238, (B, COD CNCSIS 894).

Neamţ Liviu, Horgos Mircea, Chiver Olivian, Erdei Zoltan, Estimation of power cables magnetic fields in mine tunnels, Journal of Sustainable Energy, Volume II-Nr. 4, ISSN 2067-5534, (B+, COD CNCSIS 817).

Neamţ Liviu, Neamţ Alina, Chiver Olivian, Horgos Mircea, A flexible design method for double-shell magnetostatic shields, Journal of Electrical and Electronics Engineering, Volume 4-Nr. 1, ISSN P: 1844-6035 E: 2067-2128, (B+, COD CNCSIS 682).

Neamţ Liviu, COMAN Mirela, Corrected simple solar irradiance model for mono-Si photovoltaic potential pstimation, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

S. Oniga, I. Orha, Hardware Implemented Neural Networks used for Hand Gestures Recognition, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

6

S. Oniga, A. Osan, A. Alexan, Alternative control method of the smart house: natural gestures, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

Constantin OPREA, Cristian BARZ, Contribution to automate regulation after the speed of actions with asynchronized synchronous motor, ANNALS OF FACULTY ENGINEERING HUNEDOARA-INTERNATIONAL JOURNAL OF ENGINEERING, Tome IX, Fascicule 4 (extra), http://annals.fih.upt.ro.

P.C. Pop, O. Matei, E. Burzo and C. Gyorodi, A Computational Analysis of Heuristic Algorithms for Solving the Generalized Vehicle Routing Problem, Journal of Computers and Control Systems, Vol. 4, No. 1, pp. 143-149, 2011, ISSN 1844-6043.

Pop D. D, Târnovan R, Neamţ L, Vaida T., Optimal design of a cylindrical magnetic shield against electromagnetic interferences, Acta Electrotehnica; Special Issue: „Selected Papers from the 4th International Conferences on Modern Power Systems, MPS 2011, Cluj Napoca, Romania”, ISSN 1841-3323, (B+, COD CNCSIS 576).

Ravai Nagy, S., Lobontiu, M., Approach to the test of flexural strength of the teeth of gears with asymetric teeth., Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume X (XX), 2011, Nr.2, ISSN 1583-0691 (e), (B+, COD CNCSIS 564).

Ravai Nagy, S., Lobontiu, M., Issues on cylindrical gearings with asymmetric teeth, Scientific Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Sebastian Sabou, Claudiu Lung, Ioan Orha, Simple vision for microcontroller, CARPATHIAN JOURNAL of ELECTRONIC and COMPUTER ENGINEERING, Vol. 4, Nr. 1, http://ece.ubm.ro/cjece/, ISSN 1844-9689, (B+, COD CNCSIS 865).

Ungureanu, M., Craciun, I., Stoicovici, D., Study for elevator cage position, Scientific Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Ungureanu, N., Ungureanu, M., Alexandrescu, M., Implementation of TPM principles, Buletin, Series C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), ISSN 1224-3264, (B+, COD CNCSIS 610).

Articole publicate în reviste româneşti în atenţia CNCSIS reviste de tip D

Sebastian Sabou, Claudiu Lung, Ioan Orha, Reference for Indoor Location Systems, Novice Insights in Electronics, Communications and Information Technology, ISSN 1842-6085, COD CNCSIS 782.

7

Lucrări publicate în volumele congreselor mondiale cu referenţi ştiinţifici şi recunoscute pe plan mondial în

domeniul de ştiinţă respectiv Alexandrescu, M., Cotetiu, R., Cotetiu, A., Ungureanu, N., Daraba, D.,

Aspects of the Behavior Lubrificant Film to Dynamic Stress at a Radial Bearing with HD Lubrification, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.7-12, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Babut, C., Ungureanu, N., Consideration on the damage of fire hose coupling II, 12th International Scientific Conference, Automation in production planning and manufacturing, Scientific and Technical Society of University of Zilina, 2011, ISBN 978-80-89276-28-8.

Babut, C., Ungureanu, N., Considerations on the damaging of fire hose couplings I, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.25-30, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Banica, M., Sugar, I.R., Experimental Studies on Reducing Noise Pollution and Chemical Pollution of Motor Vehicles, 12th WSEAS International Conference on MATHEMATICS AND COMPUTERS IN BIOLOGY AND CHEMISTRY (MCBC '11), Transilvania University of Brasov, Romania, April 11-13, 2011, Book MATHEMATICS and COMPUTERS in BIOLOGY, BUSINESS and ACOUSTICS, ISBN 978-960-474-293-6, Published by WSEAS Press, pp.82-85, http://www.wseas.us/books/2011/Brasov2/MCBANTA.pdf, ISBN 978-960-474-293-6.

Cotetiu, A., Alexandrescu, M., Aspects Regarding Monitoring Process Integration Graduates In The Labour Market. Study Case, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.73-78, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Cotetiu, R., Alexandrescu, M., Friction And The Phenomenon Of Sliding Speed, Temperature, Stiffness and Vibrations, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry,

8

Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.67-72, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Cotetiu, R., Alexandrescu, M., Research on Effects of Friction on the Phenomenon of Sliding Speed, Temperature, Stiffness and Vibrations, 12th International Conference „Automation in Production Planning and Manufacturing“, Zilina, pg.15, ISBN 978-80-89276-28-8, Published by Scientific and Technical Society at the University of Zilina.

Craciun, I., Ungureanu, M., Dragan, L., About Jerk At The Start And Stop Of An Electrical Powered Elevator, 12th International Conference „Automation in Production Planning and Manufacturing“, Zilina, pg.72-74, ISBN 978-80-89276-28-8, Published by Scientific and Technical Society at the University of Zilina.

Gherasim Solovestru Domide, Arthur Zelinschi, Alexandru Domide, Mircea Horgos, Evoluţia pieţei asigurarilor din România în contextul crizei economice globale, www.afahc.ro/AFASES_2011, ISSN-L 2247-3137, volumul conferintei este sub acord cu baza de date EBSCO.

Lobontiu, M., Lazar, V., Diciuc, V., Aspects regarding the Wear of the Active Components of Equipments belonging to the Extractive Industry, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.161-166 ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Medan, N., Lobontiu, M., Aspercts of produsct development for sewer cleaning vehicle, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.179-182, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Nasui, V., About establishing specific measurements when projectinmg linear actuators, The XV-th International Conference of Inventics “INVENTICA 2011”, June 8-10, 2011, Iasi, Romania, National Institute Of Inventics Iasi, Romania , through "Gheorghe Asachi" Technical University of Iasi, and Romania Inventors Society in Iasi, Romania, Book INVENTICA 2011, Edited by Performantica Publishing House, Iasi, pg. 405-409, ISSN 1844-7880, http://www.inventica.org.ro/inventica2011/

Nasui, V., About modelling the movement control of the electromechanic linear actuator, The 6th International Conference on Manufacturing Systems ICMS 2011, “Gheorghe Asachi” Technical University of Iaşi, pg.126-132, ISSN 1011-2855, http://www.icms.ro/

9

Nasui, V., Cotetiu, R., Ungureanu, N., Pay, G., Some Considerations Regarding the Represent Stage of the Electromechanic Linear Actuators, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.205-210, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Petrovan, A., Lobontiu, M., Ontology Engineering for Product Development, 2nd Review of Management and Economic Engineering Management Conference, ISSN: 2247-8639.

Pop, E., Buchman, A., Chiver, O., Horgos, M., Alexandrescu, M., Study of Electrical Capacitance of Hydrodynamic Journal Bearing, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.233-238, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Ravai Nagy, S., Manufacturing gears with asymmetric teeth through the method of copying, and designing side-milling cutters for gears with asymmetric teeth, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.245-250, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Sugar, I.R., Banica, M., Experimental Studies on Growth Performance of Internal Combustion Engines, 3rd WSEAS International Conference on MANUFACTURING ENGINEERING, QUALITY and PRODUCTION SYSTEMS (MEQAPS '11), Transilvania University of Brasov, Romania, April 11-13, 2011, Book RECENT RESEARCHES in MANUFACTURING ENGINEERING, ISBN 978-960-474-294-3, Published by WSEAS Press, pp.169-172, ISBN 978-960-474-294-3, http://www.wseas.us/books/2011/Brasov2/MEQAPS.pdf

Ungureanu Nicolae, Organizing of accidental repairs of mechanical systems, Automation in production planning and manufacturing, 12th International Scientific Conference, Scientific and Technical Society of University of Zilina, ISBN 978-80-89276-28-8.

Ungureanu, M., Craciun, I., Cosma, M., Damian, F., Study Of Jerk At The Start And Stop Of An Electrical Powered Elevator, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers

10

from Romania, pg.273-278, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Ungureanu, N., Barisic, B., Grozav, S., Costs Of Maintenance, International Multidisciplinary Conference, 9th edition, MAY 19-21, North University of Baia Mare, Romania and University College of Nyiregyhaza, Hungary, in cooperation with Romanian Technical Academy of Science, Scientific Association on Machine Industry, Hungary, Academical Committee of Debrecen, General Associaton of Engineers from Romania, pg.269-272, ISBN 978-615-5097-18-8, Bessenyei Publishing House Nyiregyhaza, Hungary.

Cărţi, cursuri publicate în edituri internaționale de prestigiu

STOICOVICI Dinu Ioan, Screening Critical Humidity Material. Establishing The Optimal Jump Regime, LAP LAMBERT ACADEMIC PUBLISHING, AG&CO.KG, KOLN, GERMANY, https://www.lap-publishing.com/catalog/details/store/ru/book/978-3-8443-9674-4/screening-critical-humidity-material, 100 pg., ISBN 978-3-8443-9674-4.

Cărţi, cursuri publicate în edituri recunoscute CNCSIS BÎRLE Vasile, Bazele economiei, Ed. Universitatii de Nord, Baia Mare, 298 pg.,

ISBN 978-606-536-196-6.

OPREA Constantin, BARZ Cristian, Elemente de inginerie electrică, reglarea automată şi automatizări, Ed. RISOPRINT CLUJ NAPOCA, 400 pg., ISBN 978-973-53-0549-9.

DĂSCĂLESCU Anamaria, TISAN Vasile, INDRUMATOR pentru lucrari de laborator la MECANISME, **: Dinamica mecanismelor cu came si cu roti dintate, Ed. RISOPRINT CLUJ NAPOCA, 92 pg. ISBN 978-973-53-0218-4 (general), ISBN 978-973-53-0504-8 (vol II).

DRAGAN Liliana, Tolerante, Ajustaje si Control, Ed. RISOPRINT CLUJ NAPOCA, 260 pg., ISBN 978-973-53-0474-4;

Taucean Ilie (coord.), Duval Pascal, Legutko Stanislaw, Novak-Marcincin Jozef, UNGUREANU Nicolae, Amariei Olga, Taroata Anghel, Actual challenges in logistics and maintenance of industrial systems*, Ed. Politehnica, 311 pg., ISBN 978-606-554-209-7 (general), ISBN 978-606-554-291-4 (vol I);

Taucean Ilie (coord.), Duval Pascal, Legutko Stanislaw, Novak-Marcincin Jozef, UNGUREANU Nicolae, Amariei Olga, Taroata Anghel, Actual challenges in logistics and maintenance of industrial systems**, Ed. Politehnica, 262 pg., ISBN 978-606-554-209-7 (general), ISBN 978-606-554-292-1 (vol II).

11

Premii internaţionale obţinute printr-un proces de selecţie în anul 2011

Prof. dr. ing. Nasui Vasile, Diploma de excelenta si medalia târgului. Târgul International de Inventii si idei practice „Invest-Invent SIR 21!”. Baia Mare. 25-28 mai 2011.

Prof. dr. ing. Nasui Vasile, Medalia de bronz, Linear actuator mechanism multiaxial. IENA 2011-Salonul International „Idei, Inventii, Produse Noi“, 27-30.10.2011. Nuremberg, Germania.

Prof. dr. ing. Nasui Vasile, Diploma a Universitatii Tehnice a Moldovei. Chisinau 2011. Republica Moldova. Ministerul Educatiei

Prof. dr. ing. Nasui Vasile, Diploma. Premiu special. Uniunea Ucraineana a Inventatorilor si Inovatorilor Grup de inventii. Expozitie Internationala Specializata Infoinvent. 22-25.10.2011. Chisinau

Prof. dr. ing. Nasui Vasile, Medalia de argint. Actuatori electomecanici industriali. Expozitie Internationala Specializata Infoinvent-2011. 22-25.10.2011. Chisinau.

Premii obţinute la nivel naţional: premiile Academiei Române, Premiile acordate de CNCSIS şi premiile

acordate de Uniunile de creaţie Prof. dr. ing. Nasui Vasile, Ordinul Stiintific Gogu Constantinescu in grad de

Comandor. Societatea Inventatorilor din Romania. Brevet nr. 133/mai 2011

Coordonarea de doctoranzi în cadrul IOD UNBM Prof. dr. ing. Lobontiu Mircea: 10 doctoranzi in stagiu

Prof. dr. ing. Nasui Vasile: 7 doctoranzi in stagiu

Membru în colectivele de redacţie şi referent ştiinţific la reviste cotate ISI sau incluse în baze de date

internaţionale în străinătate şi expert de evaluare proiecte în programe internaţionale

Prof. dr. ing. Cotetiu Radu: Revista Manufacturing Engineering, Technical University of Košice, ISSN 1335-7972, CSA (Cambridge Scientific Abstracts: Engineering Research Database; Technology Research Database; Mechanical & Transportation Engineering Abstracts Database)

Prof. dr. ing. Ungureanu Nicolae: Referent Engineering Review, Rijeka, Croatia, ISSN 0350-722X

12

Prof. dr. ing. Ungureanu Nicolae: Referent Measurement Journal of the International Measurement Confederation (IMEKO), ISSN 0263-2241, Imprint: ELSEVIER

Prof. dr. ing. Ungureanu Nicolae: Revista Manufacturing Engineering, Technical University of Košice, ISSN 1335-7972, CSA (Cambridge Scientific Abstracts: Engineering Research Database; Technology Research Database; Mechanical & Transportation Engineering Abstracts Database)

Conf. dr. ing. Oniga Ștefan, Membru al International Editorial Board, International Review of Applied Sciences and Engineering, Facultatea de Inginerie a Universității din Debrecen, Ungaria, http://www.mfk.unideb.hu/index.php?/international-review-of-applied-sciences-and-engineering-irase.html

Membru în colectivele de redacţie şi referent ştiinţific la reviste de categoria B+, B în anul 2011, expert de

evaluare proiecte în programe naţionale Prof. dr. ing. Lobontiu Mircea: Referent stiintific la Revista de Management si

Inginerie Economica, B+, cod CNCSIS 79 (poz. 263 din lista revistelor B+ pe anul 2011)

Prof. dr. ing. Lobontiu Mircea: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

Prof. dr. ing. Cotetiu Radu: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

Prof. dr. ing. Ungureanu Nicolae: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

Prof. dr. ing. Ungureanu Nicolae: Annals of the University of Petrosani, Mechanical Engineering, ISSN 1454-9166 Universitas Publishing House, Petrosani Romania

Prof. dr. ing. Oprea Constantin, Carpathian Journal of Electronic and Computer Engineering, ISSN 1844-9689, Revista Categoria B+

Conf. dr. ing. Banica Mihai: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

Conf. dr. ing. Stoicovici Dinu: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

13

Conf. dr. ing. Ungureanu Miorita: Buletin Stiintific seria C: Mecanica, Tribologie, Tehnologia Constructiilor de Masini, ISSN 1224-3264, cod CNCSIS 610, Revista Categoria B+

Conf. dr. ing. Oniga Ștefan, Carpathian Journal of Electronic and Computer Engineering, ISSN 1844-9689, Revista Categoria B+

Sef lucr. dr. ing. Buchman Attila, Carpathian Journal of Electronic and Computer Engineering, ISSN 1844-9689, Revista Categoria B+

Asist.ing. Orha Ioan, Carpathian Journal of Electronic and Computer Engineering, ISSN 1844-9689, Revista Categoria B+

Prep. Ing. Lung Claudiu, Carpathian Journal of Electronic and Computer Engineering, ISSN 1844-9689, Revista Categoria B+

Membru în comitetul ştiinţific sau director al manifestărilor ştiinţifice internaţionale

Prof. dr. ing. Nasui Vasile: The International Conference on Manufacturing Systems ICMaS 2011, Editura Academia Româna, ISSN2067-9238. B+, http://www.icmas.eu

Prof. dr. ing. Nasui Vasile: The International Conference on Manufacturing Systems- ICMS. 6th Edition 2011. Universitatea Tehnică "Gheorghe Asachi" din Iaşi, B+ http://www.icms.ro/index.html

Prof. dr. ing. Nasui Vasile: The International Multidisciplinary Conference 2011, Baia Mare, Romania-Nyíregyáza, Ungary. http://eng.ubm.ro/cisi/

Prof. dr. ing. Nasui Vasile: The 15th International Conference “INVENTICA 2011”. Editura Performantica Iasi, Cod CNCSIS 85. http://www.inventica.ro/edituraperformantica/

Conf. dr. ing. Oniga Ștefan, Building Services, Mechanical and Building Industry Days. Applied Informatics section, Facultatea de Inginerie a Universitatii din Debrecen, Ungaria. 13-14 octombrie 2011, http://www.mfk.unideb.hu/conference/index.php?option=com_content&view=section&layout=blog&id=6&Itemid=60&lang=en

Conf. dr. ing. Oniga Ștefan, Embedded Systems and Wireless Sensors Networks Design and Apllications, Debrecen, 2011, Facultatea de Informatica a Universitatii din Debrecen, Ungaria, http://www.inf.unideb.hu/csma2011/index.php/csma2011/index/pages/view/eswsnda2011

Conf. dr. ing. Oniga Ștefan, 2011 IEEE 17th International Symposium for Design and Technology in Electronic Packaging (SIITME), Timisoara, 20-23 octombrie 2011, http://www.siitme.ro/siitme2011/committees-page/international-steering-committee/

14

15

Sef lucr. dr. ing. Buchman Attila, International Steering Comitee Member la 2011 IEEE 17th International Symposium for Design and Technology in Electronic Packaging, Timisoara, 2011